Kenneth at 04:59, 25 December 2016

2016-12-25T04:59:45Z

New page

== Slic3r ==

== Help ==

Slic3r Manual - Simple Mode - http://manual.slic3r.org/simple-mode/simple-mode

== Solidoodle 3 ==

<img width="300" src="http://thehackerworkshop.com/wp-content/uploads/2013/01/DSC_0421.jpg">

http://wiki.solidoodle.com/slic3r-settings-sd-3

<pre>
bed_size 200,200
gcode_flavor reprap
print_center 100,100
use_relative_e_distances 0
vibration_limit 0
z_offset 0
</pre>

Slic3r Wizard:
<pre>
G-code flavor: RepRap
Shape: Rectangular
Size: 200 x 200 mm
Origin: 0 x 0 mm
Nozzle diameter: 0.5 mm
Filament Diameter: 3 mm
Extrusion Temperature: 200 C
Bed Temperature: 70 C
</pre>

Extrusion Temperature:
: Temperature needed for extruing your filament. A rule of thumb is 160 to 230 C for PLA, and 215 to 250 C for ABS

Bed Temperature:
: Bed temperature needed for getting your filament to stick to your heated bed. A rule of thumb is 60 C for PLA and 110 C for ABS.

Slic3r Settings:

Print Settings:
* Infill:
** Fill pattern: Concentric (from rectilinear)
** Only infill where needed [x] (from [])
* Skirt and Brim:
** Distance from object: 10 mm (from 6)
** Brim width: 4 mm (from 0)
* Speed:
** perimeters: 60 mm/s (from 30)
** small perimeters: 15 mm/s (30)
** external perimeters: 50% (70)
** infill: 80 mm/s (60)
** solid infill: 20 mm/s (60)
** top solid infill: 15 mm/s (50)

Filament Settings:
* Filament:
** Color: yellow
** Diameter: 1.75
** Extrusion multiplier: .7
** Extruder Temperature:
*** First: 200 / other: 191
** Bed Temperature:
*** First: 80 / other: 75

Printer Settings:
* General:
** Nozzel diameter: 0.4 mm (from 0.5)
* Custom Start G-Code:
<pre>
;; start code
G21 ; set to mm
G91 ; relative position
G1 Z15 F4800 ; linear move to z 15 with 4800 feed rate
G90 ; set to absolute positioning
G28 ; move to home
M104 S197 ; set temp to 197 (ignored)
M190 S81 ; set bed temperature and wait
M109 S198 ; sets temp to 200 and wait (ignored)
;; start code
</pre>
* Custom End G-Code:
<pre>
;; end code
G91 ; relative position
G1 Z50 F4800 ; linear move to z 15 with 4800 feed rate
G90 ; set to absolute positioning
G28 X0 Y0 ; move to home on x and y axis
M84 ; stop idle hold
;; end code
</pre>

-

* Original Custom 1 Start G-Code:
<pre>
G21
G91
G1 Z15 F4800
G90
G28
</pre>
* Custom End 1 G-Code:
<pre>
G91
G1 Z50 F4800
G90
G28 X0 Y0
M84
</pre>

* Original Custom 2 Start G-Code:
<pre>
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
</pre>
* Custom End 2 G-Code:
<pre>
M104 S0 ; turn off temperature
G28 X0 ; home X axis
M84 ; disable motors
</pre>

Soliprint uses default:

ABS: 215 C and 105 C bed

PLA: 190 C and 50 C bed

I bump my PLA up to 195 C and 70 C bed

3D Printing/Slic3r - Revision history

Kenneth at 04:59, 25 December 2016