Kenneth: Created page with "== Oracle 11gR1 RHEL 6.0 Install == These instructions use Oracle Database 11g Release 1 on RHEL 6.0 == Oracle == Oracle Download - http://www.oracle.com/technetwork/databa..."

2015-04-15T16:48:58Z

Created page with "== Oracle 11gR1 RHEL 6.0 Install == These instructions use Oracle Database 11g Release 1 on RHEL 6.0 == Oracle == Oracle Download - http://www.oracle.com/technetwork/databa..."

New page

== Oracle 11gR1 RHEL 6.0 Install ==

These instructions use Oracle Database 11g Release 1 on RHEL 6.0

== Oracle ==

Oracle Download - http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

== Requirements ==

* 1 GB of RAM
* Swap space equal to ram (min size 2GB - max size 16GB)
* 2-5GB of free disk space (depending on version)
* Statically assigned IP address

== Modifications ==

yum install tigervnc-server

<pre>
Checking operating system requirements ...
Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3
Actual Result: redhat-6.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
</pre>

== kickstart ==

See [[#kickstart files]]

== Yum ==

$releasever = 6Server
$basearch = i386, x86_64

/etc/yum.repos.d/oeey.repo:
<pre>
cat > /etc/yum.repos.d/oeey.repo << "EOF"

[oeey]
name=oeey Repo for $releasever $basearch
baseurl=http://yum.lindonlabs.com/rhel/6.0/x86/Server/
# baseurl=/opt/yum/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

EOF
</pre>

You will need to rebuild repodata to get this to work:
createrepo .

<s>Disable RHN:</s>
sed -i 's/enabled = 1/enabled=0/' /etc/yum/pluginconf.d/rhnplugin.conf
#vi /etc/yum/pluginconf.d/rhnplugin.conf
# enabled = 0

Install dependencies:
yum install make binutils gcc libaio libaio-devel libstdc++ elfutils-libelf-devel sysstat \
compat-libstdc++-33 libgcc libstdc++-devel unixODBC unixODBC-devel

Missing from kickstart:
# i386
yum install tigervnc-server xterm twm xorg-x11-utils
yum install libaio-devel sysstat unixODBC unixODBC-devel

# x86_64
yum install tigervnc-server xterm twm xorg-x11-utils
yum install libaio-devel.x86_64 sysstat.x86_64 unixODBC.x86_64 unixODBC-devel.x86_64

== Hosts ==

<s>NOTE: May not be needed, as Network manager appears to already do this... (oh... only if using Network Manager and dhcp)</s>

<pre>
cp /etc/hosts /etc/hosts.original
echo -e "127.0.0.1\t\tlocalhost.localdomain localhost" > /etc/hosts
echo -e "`ifconfig | grep "inet addr" | head -n 1 | cut -f 2 -d ":" | cut -f 1 -d " "`\t\t`hostname` `hostname | cut -f 1 -d '.'`" >> /etc/hosts
</pre>

Example: The /etc/hosts file must contain a fully qualified name for the server:
<pre>
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
216.119.194.130 ws-194-130.oeey.com ws-194-130
</pre>

WARNING: If during the precheck you get a "not executed" instead of a "success" or "warning" your hosts file is wrong!

== Kernel Parameters ==

Add the following lines to the /etc/sysctl.conf file -
<pre>
cat >> /etc/sysctl.conf <<EOF

# Oracle Settings
#
# Only change default kernel.shmall and kernel.shmmax if pre-existing values
# are lower then listed below:
# kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
# memory settings
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 262144

EOF
</pre>

Run the following command to change the current kernel parameters:
/sbin/sysctl -p

=== limits ===

Add the following lines to the /etc/security/limits.conf file:
<pre>
cat >> /etc/security/limits.conf <<EOF

# Oracle Settings
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536

EOF
</pre>

Add the following line to the /etc/pam.d/login file, if it does not already exist:
<pre>
cat >> /etc/pam.d/login <<EOF

# Oracle Settings
session required pam_limits.so

EOF
</pre>

=== Users and Groups ===

Create the new groups and users and set password:
<pre>
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
# give password to oracle user 'test12'
# passwd oracle
echo "test12" | passwd --stdin oracle
</pre>

Create the directories in which the Oracle software and database files will be stored:
<pre>
mkdir -p /opt/oracle
chown -R oracle.oinstall /opt/oracle
mkdir /opt/oraInventory
chown -R oracle.oinstall /opt/oraInventory
</pre>

Add the following lines at the end of the Oracle user's .bash_profile file:
<pre>
cat >> /home/oracle/.bash_profile <<"EOF"

# Oracle Settings
export TMP=/tmp
export TMPDIR=$TMP

export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.1/db_1
export ORACLE_SID=orcl
export ORACLE_TERM=xterm
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH

export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/jdk/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib

if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi

EOF
</pre>

=== VNC ===

Add to the /etc/sysconfig/vncservers file
<pre>
cat >> /etc/sysconfig/vncservers <<EOF

VNCSERVERS="2:oracle"
VNCSERVERARGS[2]="-geometry 800x600"

EOF
</pre>

Log into the oracle user and create VNC Password
<pre>
#su - oracle
# give vnc login a password 'test12'
#vncpasswd ; exit
#
# generated from "vncpasswd ; cat /home/oracle/.vnc/passwd | xxd -p -"
mkdir -p /home/oracle/.vnc
echo "de2e2c59eda77881" | xxd -p -r - /home/oracle/.vnc/passwd
chmod 600 /home/oracle/.vnc/passwd
chown -R oracle:oinstall /home/oracle/.vnc
</pre>

Enable VNC persistent desktops at boot and start service
chkconfig vncserver on
service vncserver start

Remove # from /home/oracle/.vnc/xstartup to enable full desktop
<pre>
sed -i 's%# unset SESSION_MANAGER%unset SESSION_MANAGER%g' /home/oracle/.vnc/xstartup
sed -i 's%# exec /etc/X11/xinit/xinitrc%exec /etc/X11/xinit/xinitrc%g' /home/oracle/.vnc/xstartup
# restart vncserver to take effect:
service vncserver restart
</pre>

Note: This will result in: /home/oracle/.vnc/xstartup:
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc

VNC to system:
vncviewer [SYSTEM]:2

== Hack OS Version ==

This is an important step. If you miss this Oracle will complain about OS Version comparability. This can be undone, once Oracle has been installed.
cp /etc/redhat-release /etc/redhat-release.bak
echo "Red Hat Enterprise Linux Server release 5.5 (Tikanga)" > /etc/redhat-release

=== Install Oracle ===

# copy oracle install local

# 32bit:
unzip linux_11gR1_database_1013.zip

# 64bit:
unzip linux.x64_11gR1_database_1013.zip

cd database
./runInstaller

Basic Installation: (defaults + password)
Oracle Base Location: /opt/oracle
Oracle Home Location: /opt/oracle/product/11.1/db_1
Installation Type: Enterprise Edition (3.3GB)
UNIX DBA Group: dba
[x] Create Starter Database (additional 1482MB)
Global Database Name: orcl
Database Password: test12
* Used for SYS, SYSTEM, SYSMAN, and DBSNMP accounts

Specify Inventory directory and credentials: (defaults)
Full path of the inventory directory: /opt/oraInventory
Operating system group name: oinstall

<pre>
Configure Security Updates
* Email (Oracle Support email): leave blank
* deselect I wish to receive security updates
Create and configure a database:
* Desktop Class or Server Class
Server Class
Grid Options:
Single instance database installation
Install Type:
Typical Install

Oracle Configuration Manager Registration:
[ ] Enable Oracle Configuration Manager
* Skip this step
</pre>

<pre>
Typical Installation:
Oracle base: /opt/oracle
Software location: /opt/oracle/product/11.1/db_1
Storage Type: File System
Database file location: /opt/oracle/oradata
Database edition: Enterprise Edition (3.95GB)
OSDBA group: dba
Global database name: orcl.lab
* administrative password: test12

Create Inventory:
Inventory Directory: /opt/oraInventory
oraInventory Group Name: oinstall
</pre>

If the network has "not run" check your hosts file. If anything else is error or warned, you have problems.

=== root ===

Near the end of the install it will ask you to run the following root:
/opt/oraInventory/orainstRoot.sh
/opt/oracle/product/11.1/db_1/root.sh

== Unhack OS Version ==

mv /etc/redhat-release.bak /etc/redhat-release

== Enterprise Manager ==

Enterprise Manager Database Control URL - (orcl):
* https://[HOSTNAME]:1158/em

== System Checks ==

The following were the results on an RHEL 6.0 installation with the following changes:
* Hacked "version" to appear as RHEL 5
* Installed libaio-devel unixODBC-devel

<pre>
Checking operating system requirements ...
Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3
Actual Result: redhat-5
Check complete. The overall result of this check is: Passed
========================================================

Checking operating system package requirements ...
Checking for make-3.81; found make-1:3.81-19.el6-i686. Passed
Checking for binutils-2.17.50.0.6; found binutils-2.20.51.0.2-5.11.el6-i686. Passed
Checking for gcc-4.1.1; found gcc-4.4.4-13.el6-i686. Passed
Checking for libaio-0.3.106; found libaio-0.3.107-10.el6-i686. Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.107-10.el6-i686. Passed
Checking for libstdc++-4.1.1; found libstdc++-4.4.4-13.el6-i686. Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.148-1.el6-i686. Passed
Checking for sysstat-7.0.0; found sysstat-9.0.4-11.el6-i686. Passed
Checking for compat-libstdc++-33-3.2.3; found compat-libstdc++-33-3.2.3-69.el6-i686. Passed
Checking for libgcc-4.1.1; found libgcc-4.4.4-13.el6-i686. Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.4.4-13.el6-i686. Passed
Checking for unixODBC-2.2.11; found unixODBC-2.2.14-11.el6-i686. Passed
Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.14-11.el6-i686. Passed
Check complete. The overall result of this check is: Passed
========================================================

Checking kernel parameters
Checking for semmsl=250; found semmsl=250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=128. Passed
Checking for shmmax=536870912; found shmmax=536870912. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=65536. Passed
Checking for VERSION=2.6.18; found VERSION=2.6.32-71.el6.i686. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=4194304; found rmem_default=4194304. Passed
Checking for rmem_max=4194304; found rmem_max=4194304. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
========================================================

Checking Recommended glibc version
Expected result: ATLEAST=2.5-12
Actual Result: 2.12-1.7.el6
Check complete. The overall result of this check is: Passed
========================================================

Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 2020MB
Check complete. The overall result of this check is: Passed
========================================================

Checking available swap space requirements ...
Expected result: 3030MB
Actual Result: 4063MB
Check complete. The overall result of this check is: Passed
========================================================

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Passed
========================================================

Checking PATH environment variable...
Check complete. The overall result of this check is: Passed
========================================================

Checking for sufficient diskspace in TEMP location...
Check complete. The overall result of this check is: Passed
========================================================

Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Passed
========================================================

Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
========================================================

Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
========================================================

Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
========================================================

Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
========================================================
</pre>

== oracle init.d script ==

NOTE: Make sure to set the auto start flag for the database (/etc/oratab), or this will not work!

<pre>
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
#
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
#
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
#
# Note: make sure to modify /etc/oratab start
# parameter from 'N' to 'Y'
#

ORA_HOME=/opt/oracle/product/11.1/db_1
ORA_OWNER=oracle

if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi

case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
;;
esac
</pre>

<pre>
cat > /etc/init.d/oracle <<EOF
...
EOF
chmod u+x /etc/init.d/oracle
chkconfig oracle on
sed -i "s#/N$#/Y#" /etc/oratab
</pre>

== Check Oracle Status ==

As root or oracle user:
$ORACLE_HOME/bin/lsnrctl status

== Change Hostname ==

If you change the system hostname, this will break oracle.

To correctly change your system hostname:
<ol>
<li> Set hostname (using 'hostname') </li>
<ul><li> <pre>hostname NEWNAME</pre> </li></ul>
<li> Set hostname on reboot in /etc/sysconfig/network: </li>
<ul><li> <pre>HOSTNAME=NEWNAME</pre> </li></ul>
<li> Set hostname lookup in /etc/hosts: </li>
<ul><li> <pre>10.10.10.100 NEWNAME</pre> </li></ul>
<li> Change Oracle listner.ora: </li>
<ul><li> <pre>
$ vi $ORACLE_HOME/network/admin/listener.ora

# listener.ora Network Configuration File: /opt/oracle/product/11.1/db_1/network
/admin/listener.ora
# Generated by Oracle configuration tools.

LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = NEWNAME)(PORT = 1521))
)
)
</pre> </li></ul>
<li> Change Oracle tnsnames.ora: </li>
<ul><li> <pre>
$ vi $ORACLE_HOME/network/admin/tnsnames.ora

# tnsnames.ora Network Configuration File: /opt/oracle/product/11.1/db_1/network
/admin/tnsnames.ora
# Generated by Oracle configuration tools.

ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = NEWNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
</pre> </li></ul>
<li> Restart oracle </li>
<ul><li> <pre>service oracle stop ; service oracle start</pre> </li></ul>
</ol>

== Oracle Power Script ==

See [[Oracle Power Install Script (Oracle 11g - RHEL 5)]]

== Issues ==

=== error while loading shared libraries ===

If you try to run the oracle startup script and see the following:
<pre>
/opt/oracle/product/11.1/db_1/bin/lsnrctl: error while loading shared libraries: /opt/oracle/product/11.1/db_1/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
/opt/oracle/product/11.1/db_1/bin/lsnrctl: error while loading shared libraries: /opt/oracle/product/11.1/db_1/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Processing Database instance "orcl": log file /opt/oracle/product/11.1/db_1/startup.log
</pre>
heck to see if see selinux has been disabled

=== TNS:no listener ===

If you try and start or stop the oracle server and see the following:
<pre>
Processing Database instance "orcl": log file /opt/oracle/product/11.1/db_1/shutdown.log

LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 22-JUL-2010 12:53:38

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
</pre>

Check that the '(HOST=localhost.localdomain)' matches '$ hostname' and '/etc/hosts'.

=== Error in invoking target ===

The installation (Linking Oracle Database stage) will fail with the following error:

Error:
: Error in invoking target 'agent nmb nmo nmhs tclexec' of makefile '/opt/oracle/product/11.1/db_1/sysman/lib/ins_emagent.mk'. See '/opt/oraInventory/logs/installActions2011-01-12_03-52-33PM.log' for details.

The log file reports:
INFO: /usr/lib/gcc/i686-redhat-linux/4.4.4/libgcc_s.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status

Cause:
* This is caused by an incorrect version of GLIBC being used.

Solution:
* There is no solution. Switch versions of Oracle, or distributions.

Hack Solution:
* See [http://www.oracle-base.com/misc/Comments.php?page_id=874 here] for a work around solution (not supported and will break other things)

== kickstart files ==

Full system:

anaconda-ks.cfg:
<pre>
# Kickstart file automatically generated by anaconda.

#version=RHEL6
install
url --url=http://216.119.202.5/dvd/rhel/6.0/x86/
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw --iscrypted $6$D.cfKhh9D2yQmRYI$WGb5LU172IuAfnDONblTORFNiSBqxKxqj4QbGbJ6eqjY7eLPCTLSClwWcwZlDvM9nxf8eVXPHivb3lJgjuCKq1
firewall --service=ssh
authconfig --enableshadow --passalgo=sha512 --enablefingerprint
selinux --enforcing
timezone --utc America/New_York
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#clearpart --linux --drives=sda

#part /boot --fstype=ext4 --size=500
#part pv.0eC2O2-zBd7-3gib-35ff-Mv56-yl76-1YmxEH --grow --size=1

#volgroup vg_ws194122 --pesize=4096 pv.0eC2O2-zBd7-3gib-35ff-Mv56-yl76-1YmxEH
#logvol / --fstype=ext4 --name=lv_root --vgname=vg_ws194122 --grow --size=1024 --maxsize=51200
#logvol swap --name=lv_swap --vgname=vg_ws194122 --grow --size=2032 --maxsize=4064
repo --name="Red Hat Enterprise Linux" --baseurl=http://216.119.202.5/dvd/rhel/6.0/x86/ --cost=100

%packages
@additional-devel
@backup-client
@backup-server
@base
@cifs-file-server
@compat-libraries
@console-internet
@core
@debugging
@basic-desktop
@desktop-debugging
@desktop-platform
@desktop-platform-devel
@development
@dial-up
@directory-client
@directory-server
@mail-server
@eclipse
@emacs
@storage-client-fcoe
@ftp-server
@fonts
@general-desktop
@graphical-admin-tools
@graphics
@hardware-monitoring
@input-methods
@internet-browser
@java-platform
@kde-desktop
@large-systems
@legacy-unix
@legacy-x
@mainframe-access
@system-management-messaging-client
@mysql-client
@mysql
@nfs-file-server
@network-server
@storage-server
@network-file-system-client
@network-tools
@php
@performance
@perl-runtime
@postgresql-client
@postgresql
@print-server
@print-client
@remote-desktop-clients
@scientific
@security-tools
@server-platform
@server-platform-devel
@server-policy
@smart-card
@storage-client-multipath
@system-management
@system-admin-tools
@tex
@technical-writing
@web-server
@web-servlet
@system-management-wbem
@x11
@storage-client-iscsi
libXinerama-devel
xorg-x11-proto-devel
startup-notification-devel
libgnomeui-devel
libbonobo-devel
junit
libXau-devel
libgcrypt-devel
popt-devel
libdrm-devel
libXrandr-devel
libxslt-devel
libglade2-devel
gnutls-devel
mtools
pax
python-dmidecode
oddjob
sgpio
genisoimage
wodim
abrt-gui
qt-mysql
desktop-file-utils
ant
rpmdevtools
jpackage-utils
rpmlint
certmonger
pam_krb5
krb5-workstation
nscd
pam_ldap
nss-pam-ldapd
samba
netpbm-progs
ImageMagick
tcp_wrappers
xterm
xorg-x11-xdm
libXmu
perl-DBD-MySQL
dnsmasq
perl-DBD-SQLite
rdesktop
tigervnc
atlas
numpy
hmaccalc
crypto-utils
certmonger
tog-pegasus
%end
</pre>

Default system:
<pre>
# Kickstart file automatically generated by anaconda.

#version=RHEL6
install
url --url=http://216.119.202.5/dvd/rhel/6.0/x86
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw --iscrypted $6$wsjkZEKVUht.DOqu$figLkkbukpBOIe9GZ90O8HsIy/jM2mtY2RSCbfEG6Ar5zgGEAhN7Q6AZbQfcaR04SLpSNZwjc53vY5zjjJ5PT/
firewall --service=ssh
authconfig --enableshadow --passalgo=sha512 --enablefingerprint
selinux --enforcing
timezone --utc America/New_York
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#clearpart --linux --drives=sda

#part /boot --fstype=ext4 --size=500
#part pv.BxsFXn-JAUP-HTFR-FKxL-sZsZ-R4m9-P9C91u --grow --size=1

#volgroup vg_ws194121 --pesize=4096 pv.BxsFXn-JAUP-HTFR-FKxL-sZsZ-R4m9-P9C91u
#logvol / --fstype=ext4 --name=lv_root --vgname=vg_ws194121 --grow --size=1024 --maxsize=51200
#logvol swap --name=lv_swap --vgname=vg_ws194121 --grow --size=2032 --maxsize=4064
repo --name="Red Hat Enterprise Linux" --baseurl=http://216.119.202.5/dvd/rhel/6.0/x86/ --cost=100

%packages
@base
@console-internet
@core
@debugging
@directory-client
@hardware-monitoring
@java-platform
@large-systems
@network-file-system-client
@performance
@perl-runtime
@server-platform
@server-policy
pax
python-dmidecode
oddjob
sgpio
certmonger
pam_krb5
krb5-workstation
nscd
pam_ldap
nss-pam-ldapd
perl-DBD-SQLite
%end
</pre>

== keywords ==

oracle

[[Category:Oracle]]

Oracle/Database/Oracle 11gR1 RHEL6 Install - Revision history

Kenneth: Created page with "== Oracle 11gR1 RHEL 6.0 Install == These instructions use Oracle Database 11g Release 1 on RHEL 6.0 == Oracle == Oracle Download - http://www.oracle.com/technetwork/databa..."