Cisco/CBS220
< Cisco
End of Sale / End of Life
"Cisco announces the end-of-sale Cisco 220 Series Smart Switches. The last day to order the affected product(s) is July 30, 2022."
Which is confusing, as this would seem to indicate that the replacement for this document is the Cisco 220 switch?
Default Login
cisco / cisco
When you first login, it will ask you to change username and password:
Press any key to continue Username: cisco Password: ***** Please change your password from the default settings. Please change the password for better protection of your network. Enter old password :***** Enter new username :admin Enter new password :******** Confirm new password:******** SwitchXXXXXX#
Serial Console
Baud rate: 115200
tio -b 115200 /dev/ttyUSB0
Enable Mode
# end End current mode and change to enable mode
end
-
# enable Turn on privileged mode command
enable
Switch>enable Switch#
Exit
# exit Exit current mode and down to previous mode
exit
Top Level Commands
# ? cbd CBD host configuration clear Reset functions clock Manage the system clock configure Configuration from vty interface copy Copy from one file to another debug Debug Options delete Delete a file from the flash file system dir Display the list of files on the flash file system disable Turn off privileged mode command end End current mode and change to enable mode exit Exit current mode and down to previous mode no Negate a command or set its defaults ping Send ICMP ECHO_REQUEST to network hosts reload Halt and perform a cold restart renew Renew a resource show Show running system information terminal Terminal configuration traceroute Traceroute write Write running configuration to memory
Copy
#copy ?
active-image Current active image
backup-config Copy from the backup configuration file.
-- Only to a file on the flash or to a TFTP server
Example: #copy backup-config tftp://10.0.0.2/saved_cfg
flash:// Copy from a file on the flash memory (flash://filename)
mirror-config Copy from the current mirror configuration file.
Example: #copy mirror-config running-config
running-config Copy from the current running configuration file.
-- Only to another configuration file, or to a TFTP
server
Example: #copy running-config startup-config
startup-config Copy from the startup configuration file.
-- Only to a file on the flash or to a TFTP server
Example: #copy startup-config tftp://10.0.0.2/saved_cfg
tftp:// Source URL (tftp://ip address/filename) for a file on
a TFTP network server from which to download.
Examples: #copy tftp://10.1.2.3/saved-config
startup-config
#copy tftp://10.4.5.6/my_image.bin flash://image-1
Reload
# reload Halt and perform a cold restart
Show Running Config
sh run show running-config
Default Running Config of CBS220
See Cisco/CBS220/DefaultConfig
Show Startup Config
sh start sh startup-config
Show IP
sh ip
#sh ip IP Address: 192.168.1.254 Subnet Netmask: 255.255.255.0 Default Gateway: 192.168.1.1
Show Mac table
# address-table Bridge MAC address table configuration
sh mac ad sh mac address-table
Show VLAN
# vlan Display VLAN information
sh vlan
#sh vlan
VID | VLAN Name | Untagged Ports | Tagged Ports | Type
-------+------------------+------------------------------+------------------------------+---------
1 | default | gi1-48,te1-4,po1-8 | --- | Default
Show arp
# arp Show the IP ARP translation table
sh arp
Show LACP
sh lacp neighbor
# sh lacp neighbor
Flags: S - Device is sending Slow LACPDUs
F - Device is sending Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Show lldp
Show LLDP Neighbors:
sh lldp neighbor
# sh lldp neighbor Port | Device ID | Port ID | SysName | Capabilities | TTL ---- + ----------------- + ---------------- + ----------------- + -------------- + ----- gi1 | C0:C5:20:XX:XX:XX |C0:C5:20:XX:XX:XX |IDF-SWITCH-123 | Bridge | 112
Show CDP
# neighbor CDP neighbor entires
sh cdp neighbor
#sh cdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - VoIP Phone
M - Remotely-Managed Device, C - CAST Phone Port,
W - Two-Port MAC Relay
Device ID Local Adv Holdtime Capability Platform Port ID
Interface Ver.
------------------ ----------- ---- -------- ---------- ------------ -----------
Show Error Disable Recovery
# recovery Err-Disable shutdown recovery commands
#sh errdisable recovery
ErrDisable Reason | Timer Status
--------------------------+---------------
bpduguard | disabled
selfloop | disabled
broadcast-flood | disabled
unknown-multicast-flood | disabled
unicast-flood | disabled
acl | disabled
psecure-violation | disabled
dhcp-rate-limit | disabled
arp-inspection | disabled
dot1x-src-address | disabled
loopback-detection | disabled
Timer Interval : 300 seconds
Interfaces that will be enabled at the next timeout:
Port | Error Disable Reason | Time Left
-----+--------------------------+------------
Configure Terminal
# terminal Configuration terminal
conf term configure terminal
WARNING: once you enter "configure terminal", the "show" command no longer appears to work
Write Configuration
! exit out of config mode first! exit
w mem write mem write memory
Show Interfaces
sh interfaces status GigabitEthernet 1 - 48
sh interfaces status TenGigabitEthernet 1 - 4
Show Version Details
sh ver show version
#sh ver Cisco CBS220 Series Switch Software, Version 2.0.1.5, RELEASE SOFTWARE Copyright (c) 2021 by Cisco Systems, Inc. Compiled Sep 24 2021 - 13:29:15 ROM: Bootstrap program is CBS220 boot loader BOOTLDR: CBS220 Boot Loader Version 1.0.0.17, RELEASE SOFTWARE Compiled Jun 23 2021 - 13:32:02 SwitchXXXXXX uptime is 22 days, 4 hours, 59 mins, 22 secs system image is image-1 Processor 1000MHz, with 256M bytes of memory. 48 Gigabit Ethernet interfaces 0 Fast Ethernet interfaces 64M bytes of flash memory Base MAC Address : 74:11:B2:XX:XX:XX IP Address : 192.168.1.254 Subnet Mask : 255.255.255.0 Model Number : CBS220-48T-4X Serial Number : DNI264XXXXX PID : CBS220-48T-4X VID : V02
Erase Startup Config
# erase Erase all files on nvram # memory write to memory
write erase
#write erase Do you want to erase all files on nvram and reboot? [y/n] y *Oct 16 2021 05:19:07.670+0000: %SYSTEM-5-FACTORY_RESTORE: System restore to factory default
ref: [1]
hostname
conf t hostname [NAME]
Configure VLAN
conf t vlan [ID]
Switch#conf t
Switch(config)#vlan 999
Switch(config-vlan)#
Switch#sh vlan
VID | VLAN Name | Untagged Ports | Tagged Ports | Type
-------+------------------+------------------------------+------------------------------+---------
1 | default | gi1-48,te1-4,po1-8 | --- | Default
999 | VLAN0999 | --- | --- | Static
Default Config
SwitchXXXXXX#sh run config-file-header CBS220-48T-4X SwitchXXXXXX v2.0.1.5 CLI v1.0 @ ! ! ! username "cisco" privilege admin secret 8 $8$xxxxxxxxxxxxxxxxxxxxxxxxxxx ! ! ! sntp server pool.ntp.org sntp server time-a.timefreq.bldrdoc.gov sntp server time-b.timefreq.bldrdoc.gov sntp server time-c.timefreq.bldrdoc.gov sntp server time-pnp.cisco.com ! voice vlan oui-table add 00:E0:BB 3COM voice vlan oui-table add 00:03:6B Cisco voice vlan oui-table add 00:E0:75 Veritel voice vlan oui-table add 00:D0:1E Pingtel voice vlan oui-table add 00:01:E3 Siemens voice vlan oui-table add 00:60:B9 NEC/Philips voice vlan oui-table add 00:0F:E2 H3C voice vlan oui-table add 00:09:6E Avaya ! ! ! ! ! spanning-tree mst configuration name "74:11:B2:XX:XX:XX" ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface gi1 ! interface gi2 ! interface gi3 ! interface gi4 ! interface gi5 ! interface gi6 ! interface gi7 ! interface gi8 ! interface gi9 ! interface gi10 ! interface gi11 ! interface gi12 ! interface gi13 ! interface gi14 ! interface gi15 ! interface gi16 ! interface gi17 ! interface gi18 ! interface gi19 ! interface gi20 ! interface gi21 ! interface gi22 ! interface gi23 ! interface gi24 ! interface gi25 ! interface gi26 ! interface gi27 ! interface gi28 ! interface gi29 ! interface gi30 ! interface gi31 ! interface gi32 ! interface gi33 ! interface gi34 ! interface gi35 ! interface gi36 ! interface gi37 ! interface gi38 ! interface gi39 ! interface gi40 ! interface gi41 ! interface gi42 ! interface gi43 ! interface gi44 ! interface gi45 ! interface gi46 ! interface gi47 ! interface gi48 ! interface te1 ! interface te2 ! interface te3 ! interface te4 ! ! ! !
Disable or Default Config
# no Negate a command or set its defaults
#no ?
aaa Authentication, Authorization and Accounting is used to
manage user access to the system
banner Set banner display message
bonjour Enables globally MDNS advertisement and responding to
MDNS queries
boot Boot Commands
bridge Global bridge table configuration
ca-certificate CA Certificate command
cbd CBD host configuration
cdp Global CDP configuration subcommands
channel-group EtherChannel configuration
class-map This command create class map and enter class map configur
ation mode. Use no form in order to delete the class
clock Manage the system clock
crypto Global cryptographic features configuration subcommands
dot1x 802.1x configuration
eee EEE configuration
enable Modify enable password parameters
errdisable Error-Disable shutdown commands
gvrp Global GVRP configuration commands
ip Global IP configuration commands
ipv6 IPV6 configuration
jumbo-frame Jumbo Frame configuration
lacp LACP Configuration
lldp Global LLDP configuration subcommands
logging Configure message logging facilities
loopback-detection loopback-detection
mac MAC configuration
management IP management
management-vlan Management VLAN configuration
monitor Monitor configuration
passwords Passwords configuration
pnp Configure PnP
policy-map This command create policy map and enter policy map config
uration mode. Use no form to delete the policy map
port Interface status and configuration
qos Enable/Disable QoS on the device and enter the QoS mode (a
dvance/basic)
radius-server Modify RADIUS parameters
rate-limit Use the rate-limit interface configuration command to limi
t the rate of the incoming traffic. Use the no form of thi
s command to disable rate limit
rmon Remote Monitoring (RMON) configuration subcommand
security-suite Security protections
service Service options
snmp-server Modify SNMP engine parameters
sntp Configure SNTP server address.
spanning-tree Spanning Tree Subsystem
tacacs-server TACACS server command
time-range Enters time-range configuration mode and defines time rang
es for functions
traffic-shape Excess burst size configuration
username Establish User Name Authentication
vlan VLAN commands
voice Voice management
Issues
Drop unrecognized TLV
Issue:
*Sep 24 2021 00:02:59.480+0000: %LLDP-5-TLV_UNRECOGNIZE: Drop unrecognized TLV on port GigabitEthernet1
Cause:
Solution:
keywords
- ↑ How To Delete Configuration of a Cisco Router and Switches? - https://www.geeksforgeeks.org/how-to-delete-configuration-of-a-cisco-router-and-switches/