Cisco/CBS220: Difference between revisions

From Omnia
Jump to navigation Jump to search
No edit summary
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
== End of Sale / End of Life ==
https://www.cisco.com/c/en/us/products/collateral/switches/small-business-220-series-smart-plus-switches/220-series-smart-switches-eol.html
"Cisco announces the end-of-sale Cisco 220 Series Smart Switches. The last day to order the affected product(s) is July 30, 2022."
Which is confusing, as this would seem to indicate that the replacement for this document is the Cisco 220 switch?
== Default Login ==
== Default Login ==


  cisco / cisco
  cisco / cisco
When you first login, it will ask you to change username and password:
<pre>
Press any key to continue
Username: cisco
Password: *****
Please change your password from the default settings. Please change the password for better protection of your network.
Enter old password  :*****
Enter new username  :admin
Enter new password  :********
Confirm new password:********
SwitchXXXXXX#
</pre>
== Enable Mode ==
#  end  End current mode and change to enable mode
end
-
# enable  Turn on privileged mode command
enable
Switch>enable
Switch#
== Exit ==
#  exit  Exit current mode and down to previous mode
exit
== Top Level Commands ==
<pre>
# ?
  cbd        CBD host configuration
  clear      Reset functions
  clock      Manage the system clock
  configure  Configuration from vty interface
  copy        Copy from one file to another
  debug      Debug Options
  delete      Delete a file from the flash file system
  dir        Display the list of files on the flash file system
  disable    Turn off privileged mode command
  end        End current mode and change to enable mode
  exit        Exit current mode and down to previous mode
  no          Negate a command or set its defaults
  ping        Send ICMP ECHO_REQUEST to network hosts
  reload      Halt and perform a cold restart
  renew      Renew a resource
  show        Show running system information
  terminal    Terminal configuration
  traceroute  Traceroute
  write      Write running configuration to memory
</pre>
== Copy ==
<pre>
#copy ?
  active-image    Current active image
  backup-config  Copy from the backup configuration file.
                  -- Only to a file on the flash or to a TFTP server
                  Example: #copy backup-config tftp://10.0.0.2/saved_cfg
  flash://        Copy from a file on the flash memory (flash://filename)
  mirror-config  Copy from the current mirror configuration file.
                  Example: #copy mirror-config running-config
  running-config  Copy from the current running configuration file.
                  -- Only to another configuration file, or to a TFTP
                  server
                  Example: #copy running-config startup-config
  startup-config  Copy from the startup configuration file.
                  -- Only to a file on the flash or to a TFTP server
                  Example: #copy startup-config tftp://10.0.0.2/saved_cfg
  tftp://        Source URL (tftp://ip address/filename) for a file on
                  a TFTP network server from which to download.
                  Examples: #copy tftp://10.1.2.3/saved-config
                  startup-config
                  #copy tftp://10.4.5.6/my_image.bin flash://image-1
</pre>
== Reload ==
# reload  Halt and perform a cold restart


== Serial Console ==
== Serial Console ==
Line 12: Line 110:


  sh run
  sh run
show running-config
== Show Startup Config ==
sh start
sh startup-config
== Show IP ==
sh ip
<pre>
#sh ip
IP Address: 192.168.1.254
Subnet Netmask: 255.255.255.0
Default Gateway: 192.168.1.1
</pre>
== Show Mac table ==
# address-table  Bridge MAC address table configuration
sh mac ad
sh mac address-table
== Show VLAN ==
# vlan    Display VLAN information
sh vlan
<pre>
#sh vlan
  VID  |    VLAN Name    |        Untagged Ports        |        Tagged Ports          |  Type
-------+------------------+------------------------------+------------------------------+---------
    1 |          default |          gi1-48,te1-4,po1-8 |                          --- | Default
</pre>
== Show arp ==
# arp  Show the IP ARP translation table
sh arp
== Show LACP ==
sh lacp neighbor
<pre>
# sh lacp neighbor
Flags:  S - Device is sending Slow LACPDUs
        F - Device is sending Fast LACPDUs
        A - Device is in Active mode        P - Device is in Passive mode
</pre>
== Show lldp ==
sh lldp neighbors
<pre>
# sh lldp neighbor
Port |  Device ID      |    Port ID      |      SysName      |  Capabilities  |  TTL
---- + ----------------- + ---------------- + ----------------- + -------------- + -----
  gi1 | C0:C5:20:XX:XX:XX |C0:C5:20:XX:XX:XX |IDF-SWITCH-123    |        Bridge |  112
</pre>
== Show CDP ==
# neighbor    CDP neighbor entires
sh cdp neighbor
<pre>
#sh cdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
              S - Switch, H - Host, I - IGMP, r - Repeater, P - VoIP Phone
              M - Remotely-Managed Device, C - CAST Phone Port,
              W - Two-Port MAC Relay
    Device ID      Local      Adv  Holdtime Capability  Platform    Port ID
                    Interface  Ver.
------------------ ----------- ---- -------- ---------- ------------ -----------
</pre>
== Show Error Disable Recovery ==
#  recovery  Err-Disable shutdown recovery commands
<pre>
#sh errdisable recovery
ErrDisable Reason        | Timer Status
--------------------------+---------------
                bpduguard | disabled
                selfloop | disabled
          broadcast-flood | disabled
  unknown-multicast-flood | disabled
            unicast-flood | disabled
                      acl | disabled
        psecure-violation | disabled
          dhcp-rate-limit | disabled
          arp-inspection | disabled
        dot1x-src-address | disabled
      loopback-detection | disabled
Timer Interval : 300 seconds
Interfaces that will be enabled at the next timeout:
Port |  Error Disable Reason    | Time Left
-----+--------------------------+------------
</pre>
== Configure Terminal ==
# terminal  Configuration terminal
conf term
configure terminal
WARNING: once you enter "configure terminal", the "show" command no longer appears to work
== Write Configuration ==
w mem
write mem
write memory
== Show Interfaces ==
sh interfaces status GigabitEthernet 1-48
== Show Version Details ==
sh ver
show version
<pre>
#sh ver
Cisco CBS220 Series Switch Software, Version 2.0.1.5, RELEASE SOFTWARE
Copyright (c) 2021 by Cisco Systems, Inc.
Compiled Sep 24 2021 - 13:29:15
ROM: Bootstrap program is CBS220 boot loader
BOOTLDR: CBS220 Boot Loader Version 1.0.0.17, RELEASE SOFTWARE
Compiled Jun 23 2021 - 13:32:02
SwitchXXXXXX uptime is 22 days, 4 hours, 59 mins, 22 secs
system image is image-1
Processor 1000MHz, with 256M bytes of memory.
48 Gigabit Ethernet interfaces
0 Fast Ethernet interfaces
64M bytes of flash memory
Base MAC Address : 74:11:B2:XX:XX:XX
IP Address      : 192.168.1.254
Subnet Mask      : 255.255.255.0
Model Number    : CBS220-48T-4X
Serial Number    : DNI264XXXXX
PID              : CBS220-48T-4X
VID              : V02
</pre>
== Erase Startup Config ==
#  erase  Erase all files on nvram
#    memory  write to memory
write erase
<pre>
#write erase
Do you want to erase all files on nvram and reboot? [y/n] y
*Oct 16 2021 05:19:07.670+0000: %SYSTEM-5-FACTORY_RESTORE: System restore to factory default
</pre>
ref: <ref>How To Delete Configuration of a Cisco Router and Switches? - https://www.geeksforgeeks.org/how-to-delete-configuration-of-a-cisco-router-and-switches/</ref>
== hostname ==
conf t
hostname [NAME]
== Configure VLAN ==
conf t
vlan [ID]
<pre>
Switch#conf t
Switch(config)#vlan 999
Switch(config-vlan)#
Switch#sh vlan
  VID  |    VLAN Name    |        Untagged Ports        |        Tagged Ports          |  Type
-------+------------------+------------------------------+------------------------------+---------
    1 |          default |          gi1-48,te1-4,po1-8 |                          --- | Default
  999 |        VLAN0999 |                          --- |                          --- | Static
</pre>


== Default Config ==
== Default Config ==
Line 182: Line 478:
!
!
</pre>
</pre>
== Disable or Default Config ==
# no  Negate a command or set its defaults
<pre>
#no ?
  aaa                Authentication, Authorization and Accounting is used to
                      manage user access to the system
  banner              Set banner display message
  bonjour            Enables globally MDNS advertisement and responding to
                      MDNS queries
  boot                Boot Commands
  bridge              Global bridge table configuration
  ca-certificate      CA Certificate command
  cbd                CBD host configuration
  cdp                Global CDP configuration subcommands
  channel-group      EtherChannel configuration
  class-map          This command create class map and enter class map configur
                      ation mode. Use no form in order to delete the class
  clock              Manage the system clock
  crypto              Global cryptographic features configuration subcommands
  dot1x              802.1x configuration
  eee                EEE configuration
  enable              Modify enable password parameters
  errdisable          Error-Disable shutdown commands
  gvrp                Global GVRP configuration commands
  ip                  Global IP configuration commands
  ipv6                IPV6 configuration
  jumbo-frame        Jumbo Frame configuration
  lacp                LACP Configuration
  lldp                Global LLDP configuration subcommands
  logging            Configure message logging facilities
  loopback-detection  loopback-detection
  mac                MAC configuration
  management          IP management
  management-vlan    Management VLAN configuration
  monitor            Monitor configuration
  passwords          Passwords configuration
  pnp                Configure PnP
  policy-map          This command create policy map and enter policy map config
                      uration mode. Use no form to delete the policy map
  port                Interface status and configuration
  qos                Enable/Disable QoS on the device and enter the QoS mode (a
                      dvance/basic)
  radius-server      Modify RADIUS parameters
  rate-limit          Use the rate-limit interface configuration command to limi
                      t the rate of the incoming traffic. Use the no form of thi
                      s command to disable rate limit
  rmon                Remote Monitoring (RMON) configuration subcommand
  security-suite      Security protections
  service            Service options
  snmp-server        Modify SNMP engine parameters
  sntp                Configure SNTP server address.
  spanning-tree      Spanning Tree Subsystem
  tacacs-server      TACACS server command
  time-range          Enters time-range configuration mode and defines time rang
                      es for functions
  traffic-shape      Excess burst size configuration
  username            Establish User Name Authentication
  vlan                VLAN commands
  voice              Voice management
</pre>
== Issues ==
=== Drop unrecognized TLV ===
Issue:
*Sep 24 2021 00:02:59.480+0000: %LLDP-5-TLV_UNRECOGNIZE: Drop unrecognized TLV on port GigabitEthernet1
Cause:
Solution:


== keywords ==
== keywords ==


[[Category:Cisco]]
[[Category:Cisco]]

Latest revision as of 22:40, 28 May 2025

End of Sale / End of Life

https://www.cisco.com/c/en/us/products/collateral/switches/small-business-220-series-smart-plus-switches/220-series-smart-switches-eol.html

"Cisco announces the end-of-sale Cisco 220 Series Smart Switches. The last day to order the affected product(s) is July 30, 2022."

Which is confusing, as this would seem to indicate that the replacement for this document is the Cisco 220 switch?

Default Login

cisco / cisco

When you first login, it will ask you to change username and password: 

Press any key to continue
Username: cisco
Password: *****
Please change your password from the default settings. Please change the password for better protection of your network.
Enter old password  :*****
Enter new username  :admin
Enter new password  :********
Confirm new password:********
SwitchXXXXXX#

Enable Mode

#  end  End current mode and change to enable mode

end

- 

# enable  Turn on privileged mode command

enable

Switch>enable
Switch#

Exit

#   exit  Exit current mode and down to previous mode

exit

Top Level Commands

# ?
  cbd         CBD host configuration
  clear       Reset functions
  clock       Manage the system clock
  configure   Configuration from vty interface
  copy        Copy from one file to another
  debug       Debug Options
  delete      Delete a file from the flash file system
  dir         Display the list of files on the flash file system
  disable     Turn off privileged mode command
  end         End current mode and change to enable mode
  exit        Exit current mode and down to previous mode
  no          Negate a command or set its defaults
  ping        Send ICMP ECHO_REQUEST to network hosts
  reload      Halt and perform a cold restart
  renew       Renew a resource
  show        Show running system information
  terminal    Terminal configuration
  traceroute  Traceroute
  write       Write running configuration to memory

Copy

#copy ?
  active-image    Current active image
  backup-config   Copy from the backup configuration file.
                  -- Only to a file on the flash or to a TFTP server
                  Example: #copy backup-config tftp://10.0.0.2/saved_cfg
  flash://        Copy from a file on the flash memory (flash://filename)
  mirror-config   Copy from the current mirror configuration file.
                  Example: #copy mirror-config running-config
  running-config  Copy from the current running configuration file.
                  -- Only to another configuration file, or to a TFTP
                  server
                  Example: #copy running-config startup-config
  startup-config  Copy from the startup configuration file.
                  -- Only to a file on the flash or to a TFTP server
                  Example: #copy startup-config tftp://10.0.0.2/saved_cfg
  tftp://         Source URL (tftp://ip address/filename) for a file on
                  a TFTP network server from which to download.
                  Examples: #copy tftp://10.1.2.3/saved-config
                  startup-config
                  #copy tftp://10.4.5.6/my_image.bin flash://image-1

Reload

# reload  Halt and perform a cold restart

Serial Console

Baud rate: 115200 

tio -b 115200 /dev/ttyUSB0

Show Running Config

sh run
show running-config

Show Startup Config

sh start
sh startup-config

Show IP

sh ip

#sh ip
IP Address: 192.168.1.254
Subnet Netmask: 255.255.255.0
Default Gateway: 192.168.1.1

Show Mac table

# address-table  Bridge MAC address table configuration

sh mac ad
sh mac address-table

Show VLAN

# vlan     Display VLAN information

sh vlan

#sh vlan
  VID  |     VLAN Name    |        Untagged Ports        |        Tagged Ports          |  Type
-------+------------------+------------------------------+------------------------------+---------
     1 |          default |           gi1-48,te1-4,po1-8 |                          --- | Default

Show arp

# arp  Show the IP ARP translation table

sh arp

Show LACP

sh lacp neighbor

# sh lacp neighbor
Flags:  S - Device is sending Slow LACPDUs
        F - Device is sending Fast LACPDUs
        A - Device is in Active mode        P - Device is in Passive mode

Show lldp

sh lldp neighbors

# sh lldp neighbor

 Port |   Device ID       |     Port ID      |      SysName      |  Capabilities  |  TTL
 ---- + ----------------- + ---------------- + ----------------- + -------------- + -----
  gi1 | C0:C5:20:XX:XX:XX |C0:C5:20:XX:XX:XX |IDF-SWITCH-123     |         Bridge |   112

Show CDP

# neighbor    CDP neighbor entires

sh cdp neighbor

#sh cdp neighbor
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
              S - Switch, H - Host, I - IGMP, r - Repeater, P - VoIP Phone
              M - Remotely-Managed Device, C - CAST Phone Port,
              W - Two-Port MAC Relay
    Device ID       Local      Adv  Holdtime Capability   Platform     Port ID
                    Interface  Ver.
------------------ ----------- ---- -------- ---------- ------------ -----------

Show Error Disable Recovery

#   recovery  Err-Disable shutdown recovery commands



#sh errdisable recovery
 ErrDisable Reason        | Timer Status
--------------------------+---------------
                bpduguard | disabled
                 selfloop | disabled
          broadcast-flood | disabled
  unknown-multicast-flood | disabled
            unicast-flood | disabled
                      acl | disabled
        psecure-violation | disabled
          dhcp-rate-limit | disabled
           arp-inspection | disabled
        dot1x-src-address | disabled
       loopback-detection | disabled

Timer Interval : 300 seconds


Interfaces that will be enabled at the next timeout:

Port |  Error Disable Reason    | Time Left
-----+--------------------------+------------

Configure Terminal

# terminal  Configuration terminal

conf term
configure terminal

WARNING: once you enter "configure terminal", the "show" command no longer appears to work

Write Configuration

w mem
write mem
write memory

Show Interfaces

sh interfaces status GigabitEthernet 1-48

Show Version Details

sh ver
show version

#sh ver
Cisco CBS220 Series Switch Software, Version 2.0.1.5, RELEASE SOFTWARE
Copyright (c) 2021 by Cisco Systems, Inc.
Compiled Sep 24 2021 - 13:29:15

ROM: Bootstrap program is CBS220 boot loader
BOOTLDR: CBS220 Boot Loader Version 1.0.0.17, RELEASE SOFTWARE
Compiled Jun 23 2021 - 13:32:02

SwitchXXXXXX uptime is 22 days, 4 hours, 59 mins, 22 secs
system image is image-1

Processor 1000MHz, with 256M bytes of memory.
48 Gigabit Ethernet interfaces
0 Fast Ethernet interfaces

64M bytes of flash memory
Base MAC Address : 74:11:B2:XX:XX:XX
IP Address       : 192.168.1.254
Subnet Mask      : 255.255.255.0
Model Number     : CBS220-48T-4X
Serial Number    : DNI264XXXXX
PID              : CBS220-48T-4X
VID              : V02

Erase Startup Config

#  erase   Erase all files on nvram
#     memory  write to memory

write erase

#write erase
Do you want to erase all files on nvram and reboot? [y/n] y
*Oct 16 2021 05:19:07.670+0000: %SYSTEM-5-FACTORY_RESTORE: System restore to factory default

ref: [1]

hostname

conf t
hostname [NAME]

Configure VLAN

conf t
vlan [ID]

Switch#conf t
Switch(config)#vlan 999
Switch(config-vlan)#
Switch#sh vlan
  VID  |     VLAN Name    |        Untagged Ports        |        Tagged Ports          |  Type
-------+------------------+------------------------------+------------------------------+---------
     1 |          default |           gi1-48,te1-4,po1-8 |                          --- | Default
   999 |         VLAN0999 |                          --- |                          --- | Static

Default Config

SwitchXXXXXX#sh run
config-file-header
CBS220-48T-4X
SwitchXXXXXX
v2.0.1.5
CLI v1.0
@
!
!
!

username "cisco" privilege admin secret 8 $8$xxxxxxxxxxxxxxxxxxxxxxxxxxx
!
!
!
sntp server pool.ntp.org
sntp server time-a.timefreq.bldrdoc.gov
sntp server time-b.timefreq.bldrdoc.gov
sntp server time-c.timefreq.bldrdoc.gov
sntp server time-pnp.cisco.com
!
voice vlan oui-table add 00:E0:BB 3COM
voice vlan oui-table add 00:03:6B Cisco
voice vlan oui-table add 00:E0:75 Veritel
voice vlan oui-table add 00:D0:1E Pingtel
voice vlan oui-table add 00:01:E3 Siemens
voice vlan oui-table add 00:60:B9 NEC/Philips
voice vlan oui-table add 00:0F:E2 H3C
voice vlan oui-table add 00:09:6E Avaya
!
!
!
!
!
spanning-tree mst configuration
 name "74:11:B2:XX:XX:XX"
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface gi1
!
interface gi2
!
interface gi3
!
interface gi4
!
interface gi5
!
interface gi6
!
interface gi7
!
interface gi8
!
interface gi9
!
interface gi10
!
interface gi11
!
interface gi12
!
interface gi13
!
interface gi14
!
interface gi15
!
interface gi16
!
interface gi17
!
interface gi18
!
interface gi19
!
interface gi20
!
interface gi21
!
interface gi22
!
interface gi23
!
interface gi24
!
interface gi25
!
interface gi26
!
interface gi27
!
interface gi28
!
interface gi29
!
interface gi30
!
interface gi31
!
interface gi32
!
interface gi33
!
interface gi34
!
interface gi35
!
interface gi36
!
interface gi37
!
interface gi38
!
interface gi39
!
interface gi40
!
interface gi41
!
interface gi42
!
interface gi43
!
interface gi44
!
interface gi45
!
interface gi46
!
interface gi47
!
interface gi48
!
interface te1
!
interface te2
!
interface te3
!
interface te4
!
!
!
!

Disable or Default Config

# no  Negate a command or set its defaults

#no ?
  aaa                 Authentication, Authorization and Accounting is used to
                      manage user access to the system
  banner              Set banner display message
  bonjour             Enables globally MDNS advertisement and responding to
                      MDNS queries
  boot                Boot Commands
  bridge              Global bridge table configuration
  ca-certificate      CA Certificate command
  cbd                 CBD host configuration
  cdp                 Global CDP configuration subcommands
  channel-group       EtherChannel configuration
  class-map           This command create class map and enter class map configur
                      ation mode. Use no form in order to delete the class
  clock               Manage the system clock
  crypto              Global cryptographic features configuration subcommands
  dot1x               802.1x configuration
  eee                 EEE configuration
  enable              Modify enable password parameters
  errdisable          Error-Disable shutdown commands
  gvrp                Global GVRP configuration commands
  ip                  Global IP configuration commands
  ipv6                IPV6 configuration
  jumbo-frame         Jumbo Frame configuration
  lacp                LACP Configuration
  lldp                Global LLDP configuration subcommands
  logging             Configure message logging facilities
  loopback-detection  loopback-detection
  mac                 MAC configuration
  management          IP management
  management-vlan     Management VLAN configuration
  monitor             Monitor configuration
  passwords           Passwords configuration
  pnp                 Configure PnP
  policy-map          This command create policy map and enter policy map config
                      uration mode. Use no form to delete the policy map
  port                Interface status and configuration
  qos                 Enable/Disable QoS on the device and enter the QoS mode (a
                      dvance/basic)
  radius-server       Modify RADIUS parameters
  rate-limit          Use the rate-limit interface configuration command to limi
                      t the rate of the incoming traffic. Use the no form of thi
                      s command to disable rate limit
  rmon                Remote Monitoring (RMON) configuration subcommand
  security-suite      Security protections
  service             Service options
  snmp-server         Modify SNMP engine parameters
  sntp                Configure SNTP server address.
  spanning-tree       Spanning Tree Subsystem
  tacacs-server       TACACS server command
  time-range          Enters time-range configuration mode and defines time rang
                      es for functions
  traffic-shape       Excess burst size configuration
  username            Establish User Name Authentication
  vlan                VLAN commands
  voice               Voice management

Issues

Drop unrecognized TLV

Issue: 

*Sep 24 2021 00:02:59.480+0000: %LLDP-5-TLV_UNRECOGNIZE: Drop unrecognized TLV on port GigabitEthernet1

Cause:

Solution:

keywords

  1. ↑ How To Delete Configuration of a Cisco Router and Switches? - https://www.geeksforgeeks.org/how-to-delete-configuration-of-a-cisco-router-and-switches/
Retrieved from "https://aznot.com/index.php?title=Cisco/CBS220&oldid=8758"