Bitcoin/AntMiner

BITMAIN ANTMINER

BITMAIN ANTMINER - https://bitmaintech.com/

BITMAIN ANTMINER U2 2Gh/s USB Bitcoin ASIC Miner. Overclockable (~$30) - http://www.amazon.com/BITMAIN-ANTMINER-U2-Bitcoin-Overclockable/dp/B00ITD5NV6

bfgminer

See Bitcoin/BFGMiner

bfgminer - ./configure:

 Enabled..Drivers.....: ... antminer ...

./bfgminer -o 127.0.0.1:8332 -u USERNAME -p PASSWORD -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100

bfgminer (all your other setup options here) -S antminer:all --set-device antminer:clock=xCODE

...and substitute "CODE" above with one of the following 4-digit hex codes. See key below: 0981 = 2.0GH/s 0A01 = 2.1GH/s 0A81 = 2.2GH/s 0B01 = 2.3GH/s 0B81 = 2.4GH/s [1]

bfgminer --config ~/conf/bancorcoin.conf -S icarus:all -S antminer:all --set-device antminer:clock=0A01

bfgminer correct hex (works) [2]

bfgminer.exe -S antminer:all -o mint.bitminter.com:3333 -u bitcoinco_demo -p x --set-device antminer:clock=x0781

Overclocking:

Hashrate 	antminer:clock
1.6GH/s 	0781 (DEFAULT)
1.8GH/s 	0881
2.0GH/s 	0981
2.2GH/s 	0A81

config

BNCR example:

~/.bancorcoin/bancorcoin.conf 
daemon=1
server=1
rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=*
rpcport=8332
listen=1
#gen=1
rpcallowip=127.0.0.1
rpcconnect=127.0.0.1
addnode=bancorcoin.net

dmesg

usb 2-1.2: new full speed USB device number 20 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=10c4, idProduct=ea60
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: CP2102 USB to UART Bridge Controller
usb 2-1.2: Manufacturer: Silicon Labs
usb 2-1.2: SerialNumber: 0001
usb 2-1.2: configuration #1 chosen from 1 choice
cp210x 2-1.2:1.0: cp210x converter detected
usb 2-1.2: reset full speed USB device number 20 using ehci_hcd
usb 2-1.2: cp210x converter now attached to ttyUSB4

image

<nowiki>