Linux/parted

From Omnia
Revision as of 17:07, 30 January 2019 by Kenneth (talk | contribs) (→‎Larger than 2TB RAID)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

parted

GNU Parted - a partition manipulation program

Used by OpenELEC to create SD card partitions: (create_sdcard)

DISK = /dev/sdh

# writing new disklabel on $DISK (removing all partitions)...
parted -s /dev/sdh mklabel msdos

# creating partitions on $DISK...
parted -s "$DISK" unit cyl mkpart primary fat32 -- 0 16
parted -s "$DISK" unit cyl mkpart primary ext2 -- 16 -2

# make partition active (bootable)
parted -s "$DISK" set 1 boot on

# tell kernel we have a new partition table
partprobe "$DISK"

# create filesystem
# creating filesystem on $PART1...
mkfs.vfat "$PART1" -I -n System
# creating filesystem on $PART2...
mkfs.ext4 "$PART2" -L Storage

# sync disk
sync

Larger than 2TB RAID

To get larger than 2TB you need GPTs

parted /dev/sdb
 mklabel gpt
 print free
 mkpart primary 1M 4TB
 p
 set 1 raid on
 align-check optimal 1
 q
mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sd[iklm]1
mkfs.ext4 /dev/md0 -L /ci
cat /proc/mdstat

---

parted -a optimal /dev/sdf


Ref:

Tools

lsblk

List block devices:

lsblk

How To - Linux List Disk Partitions Command - nixCraft - https://www.cyberciti.biz/faq/linux-list-disk-partitions-command/

List SCSI Devices

lsscsi

Use different unit

parted -ls /dev/sda 'unit s'
parted /dev/sda 'unit s print'

[parted] How to list start/end/size sectors? - https://www.linuxquestions.org/questions/linux-software-2/%5Bparted%5D-how-to-list-start-end-size-sectors-4175461903/

Specify TB

unit TB
unit GB