Oracle/Database/Oracle 11gR1 RHEL6 Install

From Omnia
Revision as of 16:48, 15 April 2015 by Kenneth (talk | contribs) (Created page with "== Oracle 11gR1 RHEL 6.0 Install == These instructions use Oracle Database 11g Release 1 on RHEL 6.0 == Oracle == Oracle Download - http://www.oracle.com/technetwork/databa...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Oracle 11gR1 RHEL 6.0 Install

These instructions use Oracle Database 11g Release 1 on RHEL 6.0

Oracle

Oracle Download - http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

Requirements

  • 1 GB of RAM
  • Swap space equal to ram (min size 2GB - max size 16GB)
  • 2-5GB of free disk space (depending on version)
  • Statically assigned IP address

Modifications

yum install tigervnc-server
Checking operating system requirements ...
Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3
Actual Result: redhat-6.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.

kickstart

See #kickstart files

Yum

$releasever = 6Server
$basearch = i386, x86_64

/etc/yum.repos.d/oeey.repo:

cat > /etc/yum.repos.d/oeey.repo << "EOF"

[oeey]
name=oeey Repo for $releasever $basearch
baseurl=http://yum.lindonlabs.com/rhel/6.0/x86/Server/
# baseurl=/opt/yum/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

EOF


You will need to rebuild repodata to get this to work:

createrepo .

Disable RHN:

sed -i 's/enabled = 1/enabled=0/' /etc/yum/pluginconf.d/rhnplugin.conf
#vi /etc/yum/pluginconf.d/rhnplugin.conf
# enabled = 0

Install dependencies:

yum install make binutils gcc libaio libaio-devel libstdc++ elfutils-libelf-devel sysstat \
  compat-libstdc++-33 libgcc libstdc++-devel unixODBC unixODBC-devel

Missing from kickstart:

# i386
yum install tigervnc-server xterm twm xorg-x11-utils
yum install libaio-devel sysstat unixODBC unixODBC-devel
# x86_64
yum install tigervnc-server xterm twm xorg-x11-utils
yum install libaio-devel.x86_64 sysstat.x86_64 unixODBC.x86_64 unixODBC-devel.x86_64

Hosts

NOTE: May not be needed, as Network manager appears to already do this... (oh... only if using Network Manager and dhcp)

cp /etc/hosts /etc/hosts.original
echo -e "127.0.0.1\t\tlocalhost.localdomain localhost" > /etc/hosts
echo -e "`ifconfig | grep "inet addr" | head -n 1 | cut -f 2 -d ":" | cut -f 1 -d " "`\t\t`hostname` `hostname | cut -f 1 -d '.'`" >> /etc/hosts

Example: The /etc/hosts file must contain a fully qualified name for the server:

127.0.0.1		localhost.localdomain localhost
::1			localhost6.localdomain6 localhost6
216.119.194.130		ws-194-130.oeey.com ws-194-130

WARNING: If during the precheck you get a "not executed" instead of a "success" or "warning" your hosts file is wrong!

Kernel Parameters

Add the following lines to the /etc/sysctl.conf file -

cat >> /etc/sysctl.conf <<EOF

# Oracle Settings
#
# Only change default kernel.shmall and kernel.shmmax if pre-existing values
#   are lower then listed below:
# kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
# memory settings
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 262144

EOF


Run the following command to change the current kernel parameters:

/sbin/sysctl -p

limits

Add the following lines to the /etc/security/limits.conf file:

cat >> /etc/security/limits.conf <<EOF


# Oracle Settings
*               soft    nproc   	2047
*               hard    nproc   	16384
*               soft    nofile  	1024
*               hard    nofile  	65536

EOF

Add the following line to the /etc/pam.d/login file, if it does not already exist:

cat >> /etc/pam.d/login <<EOF

# Oracle Settings
session    required     pam_limits.so

EOF

Users and Groups

Create the new groups and users and set password:

groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
# give password to oracle user 'test12'
# passwd oracle
echo "test12" | passwd --stdin oracle

Create the directories in which the Oracle software and database files will be stored:

mkdir -p /opt/oracle
chown -R oracle.oinstall /opt/oracle
mkdir /opt/oraInventory
chown -R oracle.oinstall /opt/oraInventory

Add the following lines at the end of the Oracle user's .bash_profile file:

cat >> /home/oracle/.bash_profile <<"EOF"

# Oracle Settings
export TMP=/tmp
export TMPDIR=$TMP

export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.1/db_1
export ORACLE_SID=orcl
export ORACLE_TERM=xterm
export PATH=/usr/sbin:$PATH
export PATH=$ORACLE_HOME/bin:$PATH

export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export CLASSPATH=$ORACLE_HOME/jdk/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib

if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
  else
    ulimit -u 16384 -n 65536
  fi
fi

EOF

VNC

Add to the /etc/sysconfig/vncservers file

cat >> /etc/sysconfig/vncservers <<EOF

VNCSERVERS="2:oracle"
VNCSERVERARGS[2]="-geometry 800x600"

EOF

Log into the oracle user and create VNC Password

#su - oracle
# give vnc login a password 'test12'
#vncpasswd ; exit
#
# generated from "vncpasswd ; cat /home/oracle/.vnc/passwd | xxd -p -"
mkdir -p /home/oracle/.vnc
echo "de2e2c59eda77881" | xxd -p -r - /home/oracle/.vnc/passwd
chmod 600 /home/oracle/.vnc/passwd
chown -R oracle:oinstall /home/oracle/.vnc

Enable VNC persistent desktops at boot and start service

chkconfig vncserver on
service vncserver start

Remove # from /home/oracle/.vnc/xstartup to enable full desktop

sed -i 's%# unset SESSION_MANAGER%unset SESSION_MANAGER%g' /home/oracle/.vnc/xstartup
sed -i 's%# exec /etc/X11/xinit/xinitrc%exec /etc/X11/xinit/xinitrc%g' /home/oracle/.vnc/xstartup
# restart vncserver to take effect:
service vncserver restart

Note: This will result in: /home/oracle/.vnc/xstartup:

#  Uncomment the following two lines for normal desktop:
  unset SESSION_MANAGER
  exec /etc/X11/xinit/xinitrc

VNC to system:

vncviewer [SYSTEM]:2

Hack OS Version

This is an important step. If you miss this Oracle will complain about OS Version comparability. This can be undone, once Oracle has been installed.

cp /etc/redhat-release /etc/redhat-release.bak
echo "Red Hat Enterprise Linux Server release 5.5 (Tikanga)" > /etc/redhat-release

Install Oracle

# copy oracle install local

# 32bit:
unzip linux_11gR1_database_1013.zip

# 64bit:
unzip linux.x64_11gR1_database_1013.zip

cd database
./runInstaller

Basic Installation: (defaults + password)

Oracle Base Location: /opt/oracle
Oracle Home Location: /opt/oracle/product/11.1/db_1
Installation Type: Enterprise Edition (3.3GB)
UNIX DBA Group: dba
[x] Create Starter Database (additional 1482MB)
  Global Database Name: orcl
  Database Password: test12
    * Used for SYS, SYSTEM, SYSMAN, and DBSNMP accounts

Specify Inventory directory and credentials: (defaults)

Full path of the inventory directory: /opt/oraInventory
Operating system group name: oinstall
Configure Security Updates
  * Email (Oracle Support email): leave blank
  * deselect I wish to receive security updates
Create and configure a database:
 * Desktop Class or Server Class
 	Server Class
Grid Options:
 Single instance database installation
Install Type:
 Typical Install

Oracle Configuration Manager Registration:
 [ ] Enable Oracle Configuration Manager
 * Skip this step
Typical Installation:
 Oracle base: /opt/oracle
 Software location: /opt/oracle/product/11.1/db_1
 Storage Type: File System
 Database file location: /opt/oracle/oradata
 Database edition: Enterprise Edition (3.95GB)
 OSDBA group: dba
 Global database name: orcl.lab
 * administrative password: test12

Create Inventory:
 Inventory Directory: /opt/oraInventory
 oraInventory Group Name: oinstall

If the network has "not run" check your hosts file. If anything else is error or warned, you have problems.

root

Near the end of the install it will ask you to run the following root:

/opt/oraInventory/orainstRoot.sh
/opt/oracle/product/11.1/db_1/root.sh

Unhack OS Version

mv /etc/redhat-release.bak /etc/redhat-release

Enterprise Manager

Enterprise Manager Database Control URL - (orcl):

  • https://[HOSTNAME]:1158/em

System Checks

The following were the results on an RHEL 6.0 installation with the following changes:

  • Hacked "version" to appear as RHEL 5
  • Installed libaio-devel unixODBC-devel
Checking operating system requirements ...
Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3
Actual Result: redhat-5
Check complete. The overall result of this check is: Passed
========================================================

Checking operating system package requirements ...
Checking for make-3.81; found make-1:3.81-19.el6-i686.  Passed
Checking for binutils-2.17.50.0.6; found binutils-2.20.51.0.2-5.11.el6-i686.    Passed
Checking for gcc-4.1.1; found gcc-4.4.4-13.el6-i686.    Passed
Checking for libaio-0.3.106; found libaio-0.3.107-10.el6-i686.  Passed
Checking for libaio-devel-0.3.106; found libaio-devel-0.3.107-10.el6-i686.      Passed
Checking for libstdc++-4.1.1; found libstdc++-4.4.4-13.el6-i686.        Passed
Checking for elfutils-libelf-devel-0.125; found elfutils-libelf-devel-0.148-1.el6-i686. Passed
Checking for sysstat-7.0.0; found sysstat-9.0.4-11.el6-i686.    Passed
Checking for compat-libstdc++-33-3.2.3; found compat-libstdc++-33-3.2.3-69.el6-i686.    Passed
Checking for libgcc-4.1.1; found libgcc-4.4.4-13.el6-i686.      Passed
Checking for libstdc++-devel-4.1.1; found libstdc++-devel-4.4.4-13.el6-i686.    Passed
Checking for unixODBC-2.2.11; found unixODBC-2.2.14-11.el6-i686.        Passed
Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.14-11.el6-i686.    Passed
Check complete. The overall result of this check is: Passed
========================================================

Checking kernel parameters
Checking for semmsl=250; found semmsl=250.      Passed
Checking for semmns=32000; found semmns=32000.  Passed
Checking for semopm=100; found semopm=100.      Passed
Checking for semmni=128; found semmni=128.      Passed
Checking for shmmax=536870912; found shmmax=536870912.  Passed
Checking for shmmni=4096; found shmmni=4096.    Passed
Checking for shmall=2097152; found shmall=2097152.      Passed
Checking for file-max=65536; found file-max=65536.      Passed
Checking for VERSION=2.6.18; found VERSION=2.6.32-71.el6.i686.  Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.  Passed
Checking for rmem_default=4194304; found rmem_default=4194304.  Passed
Checking for rmem_max=4194304; found rmem_max=4194304.  Passed
Checking for wmem_default=262144; found wmem_default=262144.    Passed
Checking for wmem_max=262144; found wmem_max=262144.    Passed
Check complete. The overall result of this check is: Passed
========================================================

Checking Recommended glibc version
Expected result: ATLEAST=2.5-12
Actual Result: 2.12-1.7.el6
Check complete. The overall result of this check is: Passed
========================================================

Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 2020MB
Check complete. The overall result of this check is: Passed
========================================================

Checking available swap space requirements ...
Expected result: 3030MB
Actual Result: 4063MB
Check complete. The overall result of this check is: Passed
========================================================

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Passed
========================================================

Checking PATH environment variable...
Check complete. The overall result of this check is: Passed
========================================================

Checking for sufficient diskspace in TEMP location...
Check complete. The overall result of this check is: Passed
========================================================

Checking LD_LIBRARY_PATH environment variable...
Check complete. The overall result of this check is: Passed
========================================================

Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
========================================================

Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
========================================================

Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
========================================================

Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
========================================================

oracle init.d script

NOTE: Make sure to set the auto start flag for the database (/etc/oratab), or this will not work!

#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
#
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
#
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
#
# Note: make sure to modify /etc/oratab start
# parameter from 'N' to 'Y'
#

ORA_HOME=/opt/oracle/product/11.1/db_1
ORA_OWNER=oracle

if [ ! -f $ORA_HOME/bin/dbstart ]
then
    echo "Oracle startup: cannot start"
    exit
fi

case "$1" in
    'start')
        # Start the Oracle databases:
        # The following command assumes that the oracle login
        # will not prompt the user for any values
        su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
        su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
        ;;
    'stop')
        # Stop the Oracle databases:
        # The following command assumes that the oracle login
        # will not prompt the user for any values
        su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
        su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
        ;;
esac
cat > /etc/init.d/oracle <<EOF
...
EOF
chmod u+x /etc/init.d/oracle
chkconfig oracle on
sed -i "s#/N$#/Y#" /etc/oratab

Check Oracle Status

As root or oracle user:

$ORACLE_HOME/bin/lsnrctl status

Change Hostname

If you change the system hostname, this will break oracle.

To correctly change your system hostname:

  1. Set hostname (using 'hostname')
    • hostname NEWNAME
  2. Set hostname on reboot in /etc/sysconfig/network:
    • HOSTNAME=NEWNAME
  3. Set hostname lookup in /etc/hosts:
    • 10.10.10.100  NEWNAME
  4. Change Oracle listner.ora:
    • $ vi $ORACLE_HOME/network/admin/listener.ora
      
      # listener.ora Network Configuration File: /opt/oracle/product/11.1/db_1/network
      /admin/listener.ora
      # Generated by Oracle configuration tools.
      
      LISTENER =
        (DESCRIPTION_LIST =
          (DESCRIPTION =
            (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
            (ADDRESS = (PROTOCOL = TCP)(HOST = NEWNAME)(PORT = 1521))
          )
        )
      
  5. Change Oracle tnsnames.ora:
    • $ vi $ORACLE_HOME/network/admin/tnsnames.ora
      
      # tnsnames.ora Network Configuration File: /opt/oracle/product/11.1/db_1/network
      /admin/tnsnames.ora
      # Generated by Oracle configuration tools.
      
      ORCL =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = NEWNAME)(PORT = 1521))
          (CONNECT_DATA =
            (SERVER = DEDICATED)
            (SERVICE_NAME = orcl)
          )
        )
      
  6. Restart oracle
    • service oracle stop ; service oracle start

Oracle Power Script

See Oracle Power Install Script (Oracle 11g - RHEL 5)

Issues

error while loading shared libraries

If you try to run the oracle startup script and see the following:

/opt/oracle/product/11.1/db_1/bin/lsnrctl: error while loading shared libraries: /opt/oracle/product/11.1/db_1/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
/opt/oracle/product/11.1/db_1/bin/lsnrctl: error while loading shared libraries: /opt/oracle/product/11.1/db_1/lib/libnnz11.so: cannot restore segment prot after reloc: Permission denied
Processing Database instance "orcl": log file /opt/oracle/product/11.1/db_1/startup.log

heck to see if see selinux has been disabled

TNS:no listener

If you try and start or stop the oracle server and see the following:

Processing Database instance "orcl": log file /opt/oracle/product/11.1/db_1/shutdown.log

LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 22-JUL-2010 12:53:38

Copyright (c) 1991, 2007, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
 TNS-12560: TNS:protocol adapter error
  TNS-00511: No listener
   Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12541: TNS:no listener
 TNS-12560: TNS:protocol adapter error
  TNS-00511: No listener
   Linux Error: 111: Connection refused

Check that the '(HOST=localhost.localdomain)' matches '$ hostname' and '/etc/hosts'.

Error in invoking target

The installation (Linking Oracle Database stage) will fail with the following error:

Error:

Error in invoking target 'agent nmb nmo nmhs tclexec' of makefile '/opt/oracle/product/11.1/db_1/sysman/lib/ins_emagent.mk'. See '/opt/oraInventory/logs/installActions2011-01-12_03-52-33PM.log' for details.

The log file reports:

INFO: /usr/lib/gcc/i686-redhat-linux/4.4.4/libgcc_s.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status

Cause:

  • This is caused by an incorrect version of GLIBC being used.

Solution:

  • There is no solution. Switch versions of Oracle, or distributions.

Hack Solution:

  • See here for a work around solution (not supported and will break other things)

kickstart files

Full system:

anaconda-ks.cfg:

# Kickstart file automatically generated by anaconda.

#version=RHEL6
install
url --url=http://216.119.202.5/dvd/rhel/6.0/x86/
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw  --iscrypted $6$D.cfKhh9D2yQmRYI$WGb5LU172IuAfnDONblTORFNiSBqxKxqj4QbGbJ6eqjY7eLPCTLSClwWcwZlDvM9nxf8eVXPHivb3lJgjuCKq1
firewall --service=ssh
authconfig --enableshadow --passalgo=sha512 --enablefingerprint
selinux --enforcing
timezone --utc America/New_York
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#clearpart --linux --drives=sda

#part /boot --fstype=ext4 --size=500
#part pv.0eC2O2-zBd7-3gib-35ff-Mv56-yl76-1YmxEH --grow --size=1

#volgroup vg_ws194122 --pesize=4096 pv.0eC2O2-zBd7-3gib-35ff-Mv56-yl76-1YmxEH
#logvol / --fstype=ext4 --name=lv_root --vgname=vg_ws194122 --grow --size=1024 --maxsize=51200
#logvol swap --name=lv_swap --vgname=vg_ws194122 --grow --size=2032 --maxsize=4064
repo --name="Red Hat Enterprise Linux"  --baseurl=http://216.119.202.5/dvd/rhel/6.0/x86/ --cost=100

%packages
@additional-devel
@backup-client
@backup-server
@base
@cifs-file-server
@compat-libraries
@console-internet
@core
@debugging
@basic-desktop
@desktop-debugging
@desktop-platform
@desktop-platform-devel
@development
@dial-up
@directory-client
@directory-server
@mail-server
@eclipse
@emacs
@storage-client-fcoe
@ftp-server
@fonts
@general-desktop
@graphical-admin-tools
@graphics
@hardware-monitoring
@input-methods
@internet-browser
@java-platform
@kde-desktop
@large-systems
@legacy-unix
@legacy-x
@mainframe-access
@system-management-messaging-client
@mysql-client
@mysql
@nfs-file-server
@network-server
@storage-server
@network-file-system-client
@network-tools
@php
@performance
@perl-runtime
@postgresql-client
@postgresql
@print-server
@print-client
@remote-desktop-clients
@scientific
@security-tools
@server-platform
@server-platform-devel
@server-policy
@smart-card
@storage-client-multipath
@system-management
@system-admin-tools
@tex
@technical-writing
@web-server
@web-servlet
@system-management-wbem
@x11
@storage-client-iscsi
libXinerama-devel
xorg-x11-proto-devel
startup-notification-devel
libgnomeui-devel
libbonobo-devel
junit
libXau-devel
libgcrypt-devel
popt-devel
libdrm-devel
libXrandr-devel
libxslt-devel
libglade2-devel
gnutls-devel
mtools
pax
python-dmidecode
oddjob
sgpio
genisoimage
wodim
abrt-gui
qt-mysql
desktop-file-utils
ant
rpmdevtools
jpackage-utils
rpmlint
certmonger
pam_krb5
krb5-workstation
nscd
pam_ldap
nss-pam-ldapd
samba
netpbm-progs
ImageMagick
tcp_wrappers
xterm
xorg-x11-xdm
libXmu
perl-DBD-MySQL
dnsmasq
perl-DBD-SQLite
rdesktop
tigervnc
atlas
numpy
hmaccalc
crypto-utils
certmonger
tog-pegasus
%end

Default system:

# Kickstart file automatically generated by anaconda.

#version=RHEL6
install
url --url=http://216.119.202.5/dvd/rhel/6.0/x86
lang en_US.UTF-8
keyboard us
network --device eth0 --bootproto dhcp
rootpw  --iscrypted $6$wsjkZEKVUht.DOqu$figLkkbukpBOIe9GZ90O8HsIy/jM2mtY2RSCbfEG6Ar5zgGEAhN7Q6AZbQfcaR04SLpSNZwjc53vY5zjjJ5PT/
firewall --service=ssh
authconfig --enableshadow --passalgo=sha512 --enablefingerprint
selinux --enforcing
timezone --utc America/New_York
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
# The following is the partition information you requested
# Note that any partitions you deleted are not expressed
# here so unless you clear all partitions first, this is
# not guaranteed to work
#clearpart --linux --drives=sda

#part /boot --fstype=ext4 --size=500
#part pv.BxsFXn-JAUP-HTFR-FKxL-sZsZ-R4m9-P9C91u --grow --size=1

#volgroup vg_ws194121 --pesize=4096 pv.BxsFXn-JAUP-HTFR-FKxL-sZsZ-R4m9-P9C91u
#logvol / --fstype=ext4 --name=lv_root --vgname=vg_ws194121 --grow --size=1024 --maxsize=51200
#logvol swap --name=lv_swap --vgname=vg_ws194121 --grow --size=2032 --maxsize=4064
repo --name="Red Hat Enterprise Linux"  --baseurl=http://216.119.202.5/dvd/rhel/6.0/x86/ --cost=100

%packages
@base
@console-internet
@core
@debugging
@directory-client
@hardware-monitoring
@java-platform
@large-systems
@network-file-system-client
@performance
@perl-runtime
@server-platform
@server-policy
pax
python-dmidecode
oddjob
sgpio
certmonger
pam_krb5
krb5-workstation
nscd
pam_ldap
nss-pam-ldapd
perl-DBD-SQLite
%end

keywords

oracle