3D Printing/Slic3r

From Omnia
Jump to navigation Jump to search

Slic3r

Help

Slic3r Manual - Simple Mode - http://manual.slic3r.org/simple-mode/simple-mode

Solidoodle 3

http://wiki.solidoodle.com/slic3r-settings-sd-3

bed_size 			200,200
gcode_flavor 			reprap
print_center 			100,100
use_relative_e_distances 	0
vibration_limit 		0
z_offset 			0

Slic3r Wizard:

G-code flavor:		RepRap
Shape:			Rectangular
  Size:			200 x 200 mm
  Origin:		0 x 0 mm
Nozzle diameter:	0.5 mm
Filament Diameter:	3 mm
Extrusion Temperature:	200 C
Bed Temperature:	70 C

Extrusion Temperature:

Temperature needed for extruing your filament. A rule of thumb is 160 to 230 C for PLA, and 215 to 250 C for ABS

Bed Temperature:

Bed temperature needed for getting your filament to stick to your heated bed. A rule of thumb is 60 C for PLA and 110 C for ABS.

Slic3r Settings:

Print Settings:

  • Infill:
    • Fill pattern: Concentric (from rectilinear)
    • Only infill where needed [x] (from [])
  • Skirt and Brim:
    • Distance from object: 10 mm (from 6)
    • Brim width: 4 mm (from 0)
  • Speed:
    • perimeters: 60 mm/s (from 30)
    • small perimeters: 15 mm/s (30)
    • external perimeters: 50% (70)
    • infill: 80 mm/s (60)
    • solid infill: 20 mm/s (60)
    • top solid infill: 15 mm/s (50)

Filament Settings:

  • Filament:
    • Color: yellow
    • Diameter: 1.75
    • Extrusion multiplier: .7
    • Extruder Temperature:
      • First: 200 / other: 191
    • Bed Temperature:
      • First: 80 / other: 75

Printer Settings:

  • General:
    • Nozzel diameter: 0.4 mm (from 0.5)
  • Custom Start G-Code:
;; start code
G21    ; set to mm
G91    ; relative position
G1 Z15 F4800    ; linear move to z 15 with 4800 feed rate
G90    ; set to absolute positioning
G28    ; move to home
M104 S197  ; set temp to 197 (ignored)
M190 S81    ; set bed temperature and wait
M109 S198    ; sets temp to 200 and wait (ignored)
;; start code
  • Custom End G-Code:
;; end code
G91    ; relative position
G1 Z50 F4800    ; linear move to z 15 with 4800 feed rate
G90    ; set to absolute positioning
G28 X0 Y0    ; move to home on x and y axis
M84    ; stop idle hold
;; end code

-

  • Original Custom 1 Start G-Code:
G21
G91
G1 Z15 F4800
G90
G28
  • Custom End 1 G-Code:
G91
G1 Z50 F4800
G90
G28 X0 Y0
M84


  • Original Custom 2 Start G-Code:
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
  • Custom End 2 G-Code:
M104 S0 ; turn off temperature
G28 X0  ; home X axis
M84     ; disable motors

Soliprint uses default:

ABS: 215 C and 105 C bed

PLA: 190 C and 50 C bed

I bump my PLA up to 195 C and 70 C bed