RustDesk

From Omnia
Jump to navigation Jump to search

Rust Desk

Installation

Installation :: Documentation for RustDesk
https://rustdesk.com/docs/en/self-host/rustdesk-server-oss/install/

ufw allow 22/tcp comment "SSH"

ufw allow 21114:21119/tcp comment "RustDesk"
ufw allow 8000/tcp comment "RustDesk Web"
ufw allow 21116/udp comment "RustDesk"
sudo ufw enable

wget https://raw.githubusercontent.com/techahold/rustdeskinstall/master/install.sh
chmod +x install.sh
./install.sh

Docker Option

ref: https://rustdesk.com/docs/en/self-host/rustdesk-server-oss/docker/ 

sudo docker image pull rustdesk/rustdesk-server
sudo docker run --name hbbs -v ./data:/root -td --net=host --restart unless-stopped rustdesk/rustdesk-server hbbs
sudo docker run --name hbbr -v ./data:/root -td --net=host --restart unless-stopped rustdesk/rustdesk-server hbbr

Services

hbbs - RustDesk ID/Rendezvous server hbbr - RustDesk Relay server

Installation Creator

https://rdgen.crayoneater.org/

Web Client

https://rustdesk.com/web/

Config Location

%AppData%\RustDesk\config\

RustDesk Docker

See https://rustdesk.com/docs/en/self-host/rustdesk-server-oss/install/

Docker Compose Example: 

bash <(wget -qO- https://get.docker.com)
wget rustdesk.com/oss.yml -O compose.yml
sudo docker compose up -d

Manual Docker Example: 

sudo docker image pull rustdesk/rustdesk-server
sudo docker run --name hbbs -v ./data:/root -td --net=host --restart unless-stopped rustdesk/rustdesk-server hbbs
sudo docker run --name hbbr -v ./data:/root -td --net=host --restart unless-stopped rustdesk/rustdesk-server hbbr

System status for RustDesk: 

systemctl status rustdesksignal
  /opt/rustdesk/hbbs
systemctl status rustdeskrelay
  /opt/rustdesk/hbbr

systemctl stop rustdesksignal
 systemctl stop rustdeskrelay

Docker Guide:

Manual Installation

https://github.com/techahold/rustdeskinstall

 [1]

https://github.com/rustdesk/rustdesk-server/releases/tag/1.1.16

Web Client

If you do not need web client support, the corresponding ports 21118, 21119 can be disabled.

Web Client:

When WebSocket is enabled (ports 21118/21119 are open for the web client), hbbs/hbbr trust the X-Real-IP / X-Forwarded-For headers of incoming WebSocket connections to determine the real client IP, so that the client IP is preserved when the WebSocket traffic goes through a reverse proxy (WSS).

Firewall ports

hbbs:

  • 21114 (TCP): used for web console, only available in Pro version.
  • 21115 (TCP): used for the NAT type test.
  • 21116 (TCP/UDP): Please note that 21116 should be enabled both for TCP and UDP. 21116/UDP is used for the ID registration and heartbeat service. 21116/TCP is used for TCP hole punching and connection service.
  • 21118 (TCP): used to support web clients.

hbbr:

  • 21117 (TCP): used for the Relay services.
  • 21119 (TCP): used to support web clients.


ufw allow 21115:21119/tcp comment RustDesk
ufw allow 2116/udp comment RustDesk

Deployment Scripts

See

Windows Powershell

$ErrorActionPreference= 'silentlycontinue'

# Assign the value random password to the password variable
$rustdesk_pw=(-join ((65..90) + (97..122) | Get-Random -Count 12 | % {[char]$_}))

# Get your config string from your Web portal and Fill Below
$rustdesk_cfg="configstring"

################################## Please Do Not Edit Below This Line #########################################

# Run as administrator and stays in the current directory
if (-Not ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator))
{
    if ([int](Get-CimInstance -Class Win32_OperatingSystem | Select-Object -ExpandProperty BuildNumber) -ge 6000)
    {
        Start-Process PowerShell -Verb RunAs -ArgumentList "-NoProfile -ExecutionPolicy Bypass -Command `"cd '$pwd'; & '$PSCommandPath';`"";
        Exit;
    }
}

# This function will return the latest version and download link as an object
function getLatest()
{
    $Page = Invoke-WebRequest -Uri 'https://github.com/rustdesk/rustdesk/releases/latest' -UseBasicParsing
    $HTML = New-Object -Com "HTMLFile"
    try
    {
        $HTML.IHTMLDocument2_write($Page.Content)
    }
    catch
    {
        $src = [System.Text.Encoding]::Unicode.GetBytes($Page.Content)
        $HTML.write($src)
    }

    # Current example link: https://github.com/rustdesk/rustdesk/releases/download/1.2.6/rustdesk-1.2.6-x86_64.exe
    $Downloadlink = ($HTML.Links | Where {$_.href -match '(.)+\/rustdesk\/rustdesk\/releases\/download\/\d{1}.\d{1,2}.\d{1,2}(.{0,3})\/rustdesk(.)+x86_64.exe'} | select -first 1).href

    # bugfix - sometimes you need to replace "about:"
    $Downloadlink = $Downloadlink.Replace('about:', 'https://github.com')

    $Version = "unknown"
    if ($Downloadlink -match './rustdesk/rustdesk/releases/download/(?<content>.*)/rustdesk-(.)+x86_64.exe')
    {
        $Version = $matches['content']
    }

    if ($Version -eq "unknown" -or $Downloadlink -eq "")
    {
        Write-Output "ERROR: Version or download link not found."
        Exit
    }

    # Create object to return
    $params += @{Version = $Version}
    $params += @{Downloadlink = $Downloadlink}
    $Result = New-Object PSObject -Property $params

    return($Result)
}

$RustDeskOnGitHub = getLatest


$rdver = ((Get-ItemProperty  "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\RustDesk\").Version)

if ($rdver -eq $RustDeskOnGitHub.Version)
{
    Write-Output "RustDesk $rdver is the newest version."
    Exit
}

if (!(Test-Path C:\Temp))
{
    New-Item -ItemType Directory -Force -Path C:\Temp | Out-Null
}

cd C:\Temp

Invoke-WebRequest $RustDeskOnGitHub.Downloadlink -Outfile "rustdesk.exe"
Start-Process .\rustdesk.exe --silent-install
Start-Sleep -seconds 20

$ServiceName = 'Rustdesk'
$arrService = Get-Service -Name $ServiceName -ErrorAction SilentlyContinue

if ($arrService -eq $null)
{
    Write-Output "Installing service"
    cd $env:ProgramFiles\RustDesk
    Start-Process .\rustdesk.exe --install-service
    Start-Sleep -seconds 20
    $arrService = Get-Service -Name $ServiceName
}

while ($arrService.Status -ne 'Running')
{
    Start-Service $ServiceName
    Start-Sleep -seconds 5
    $arrService.Refresh()
}

cd $env:ProgramFiles\RustDesk\
.\rustdesk.exe --get-id | Write-Output -OutVariable rustdesk_id

.\rustdesk.exe --config $rustdesk_cfg

.\rustdesk.exe --password $rustdesk_pw

Write-Output "..............................................."
# Show the value of the ID Variable
Write-Output "RustDesk ID: $rustdesk_id"

# Show the value of the Password Variable
Write-Output "Password: $rustdesk_pw"
Write-Output "..............................................."

Windows Batch

@echo off

REM Assign the value random password to the password variable
setlocal ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
set alfanum=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789
set rustdesk_pw=
for /L %%b in (1, 1, 12) do (
    set /A rnd_num=!RANDOM! %% 62
    for %%c in (!rnd_num!) do (
        set rustdesk_pw=!rustdesk_pw!!alfanum:~%%c,1!
    )
)

REM Get your config string from your Web portal and Fill Below
set rustdesk_cfg="configstring"

REM ############################### Please Do Not Edit Below This Line #########################################

if not exist C:\Temp\ md C:\Temp\
cd C:\Temp\

curl -L "https://github.com/rustdesk/rustdesk/releases/download/1.2.6/rustdesk-1.2.6-x86_64.exe" -o rustdesk.exe

rustdesk.exe --silent-install
timeout /t 20

cd "C:\Program Files\RustDesk\"
rustdesk.exe --install-service
timeout /t 20

for /f "delims=" %%i in ('rustdesk.exe --get-id ^| more') do set rustdesk_id=%%i

rustdesk.exe --config %rustdesk_cfg%

rustdesk.exe --password %rustdesk_pw%

echo ...............................................
REM Show the value of the ID Variable
echo RustDesk ID: %rustdesk_id%

REM Show the value of the Password Variable
echo Password: %rustdesk_pw%
echo ...............................................

Windows EXE Rename

WARNING: This stopped working in version v1.4.7 due to stricter IPC security scoping that rejects processes with mismatched executable names [2] 

rustdesk-host=<YOUR_SERVER_IP_OR_DOMAIN>,key=<YOUR_PUBLIC_KEY>,.exe

See https://github.com/rustdesk/rustdesk/discussions/8898

Linux

#!/bin/bash

# Assign a random value to the password variable
rustdesk_pw=$(cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w 8 | head -n 1)

# Get your config string from your Web portal and Fill Below
rustdesk_cfg="configstring"

################################## Please Do Not Edit Below This Line #########################################

# Check if the script is being run as root
if [[ $EUID -ne 0 ]]; then
    echo "This script must be run as root."
    exit 1
fi

# Identify OS
if [ -f /etc/os-release ]; then
    # freedesktop.org and systemd
    . /etc/os-release
    OS=$NAME
    VER=$VERSION_ID

    UPSTREAM_ID=${ID_LIKE,,}

    # Fallback to ID_LIKE if ID was not 'ubuntu' or 'debian'
    if [ "${UPSTREAM_ID}" != "debian" ] && [ "${UPSTREAM_ID}" != "ubuntu" ]; then
        UPSTREAM_ID="$(echo ${ID_LIKE,,} | sed s/\"//g | cut -d' ' -f1)"
    fi

elif type lsb_release >/dev/null 2>&1; then
    # linuxbase.org
    OS=$(lsb_release -si)
    VER=$(lsb_release -sr)
elif [ -f /etc/lsb-release ]; then
    # For some versions of Debian/Ubuntu without lsb_release command
    . /etc/lsb-release
    OS=$DISTRIB_ID
    VER=$DISTRIB_RELEASE
elif [ -f /etc/debian_version ]; then
    # Older Debian, Ubuntu, etc.
    OS=Debian
    VER=$(cat /etc/debian_version)
elif [ -f /etc/SuSE-release ]; then
    # Older SuSE etc.
    OS=SuSE
    VER=$(cat /etc/SuSE-release)
elif [ -f /etc/redhat-release ]; then
    # Older Red Hat, CentOS, etc.
    OS=RedHat
    VER=$(cat /etc/redhat-release)
else
    # Fall back to uname, e.g. "Linux <version>", also works for BSD, etc.
    OS=$(uname -s)
    VER=$(uname -r)
fi

# Install RustDesk

echo "Installing RustDesk"
if [ "${ID}" = "debian" ] || [ "$OS" = "Ubuntu" ] || [ "$OS" = "Debian" ] || [ "${UPSTREAM_ID}" = "ubuntu" ] || [ "${UPSTREAM_ID}" = "debian" ]; then
    wget https://github.com/rustdesk/rustdesk/releases/download/1.2.6/rustdesk-1.2.6-x86_64.deb
    apt-get install -fy ./rustdesk-1.2.6-x86_64.deb > /dev/null
elif [ "$OS" = "CentOS" ] || [ "$OS" = "RedHat" ] || [ "$OS" = "Fedora Linux" ] || [ "${UPSTREAM_ID}" = "rhel" ] || [ "$OS" = "Almalinux" ] || [ "$OS" = "Rocky*" ] ; then
    wget https://github.com/rustdesk/rustdesk/releases/download/1.2.6/rustdesk-1.2.6-0.x86_64.rpm
    yum localinstall ./rustdesk-1.2.6-0.x86_64.rpm -y > /dev/null
else
    echo "Unsupported OS"
    # here you could ask the user for permission to try and install anyway
    # if they say yes, then do the install
    # if they say no, exit the script
    exit 1
fi

# Run the rustdesk command with --get-id and store the output in the rustdesk_id variable
rustdesk_id=$(rustdesk --get-id)

# Apply new password to RustDesk
rustdesk --password $rustdesk_pw &> /dev/null

rustdesk --config $rustdesk_cfg

systemctl restart rustdesk

echo "..............................................."
# Check if the rustdesk_id is not empty
if [ -n "$rustdesk_id" ]; then
    echo "RustDesk ID: $rustdesk_id"
else
    echo "Failed to get RustDesk ID."
fi

# Echo the value of the password variable
echo "Password: $rustdesk_pw"
echo "..............................................."

Docker Service

rustdesk.com/oss.ym

Summary: 

bash <(wget -qO- https://get.docker.com)
wget rustdesk.com/oss.yml -O compose.yml
sudo docker compose up -d

Install docker 

bash <(wget -qO- https://get.docker.com)

mkdir /opt/rustdesk
cd /opt/rustdesk

wget rustdesk.com/oss.yml -O compose.yml

docker compose up -d

cat data/id_ed25519.pub

UKi8wfaLEP3j8w0qIoq68PwE1N9Rz38RJABgwFQ4Wg4=

services:
  hbbs:
    container_name: hbbs
    image: rustdesk/rustdesk-server:latest
    command: hbbs
    volumes:
      - ./data:/root
    network_mode: "host"
    depends_on:
      - hbbr
    restart: unless-stopped

  hbbr:
    container_name: hbbr
    image: rustdesk/rustdesk-server:latest
    command: hbbr
    volumes:
      - ./data:/root
    network_mode: "host"
    restart: unless-stopped

Note: This standard compose.yml file uses host network mode as recommended by the RustDesk Documentation for performance and simpler firewall rules.

--

If you want to do the non Host mode, and specify the ports: 

services:
  hbbs:
    image: rustdesk/rustdesk-server:latest
    ports:
      - "21115:21115"
      - "21116:21116"
      - "21116:21116/udp"
      - "21118:21118"
    volumes:
      - ./data:/root
    depends_on:
      - hbbr
    restart: unless-stopped

  hbbr:
    image: rustdesk/rustdesk-server:latest
    ports:
      - "21117:21117"
      - "21119:21119"
    volumes:
      - ./data:/root
    restart: unless-stopped

keywords

  1. ↑ https://github.com/techahold/rustdeskinstall
  2. ↑ https://www.reddit.com/r/rustdesk/comments/1tm6m36/how_to_autoconfigure_custom_ip_and_key_in_recent/
Retrieved from "https://aznot.com/index.php?title=RustDesk&oldid=10157"