3D Printing/Slic3r

Help

Slic3r Manual - Simple Mode - http://manual.slic3r.org/simple-mode/simple-mode

Solidoodle 3

http://wiki.solidoodle.com/slic3r-settings-sd-3

bed_size 			200,200
gcode_flavor 			reprap
print_center 			100,100
use_relative_e_distances 	0
vibration_limit 		0
z_offset 			0

Slic3r Wizard:

G-code flavor:		RepRap
Shape:			Rectangular
  Size:			200 x 200 mm
  Origin:		0 x 0 mm
Nozzle diameter:	0.5 mm
Filament Diameter:	3 mm
Extrusion Temperature:	200 C
Bed Temperature:	70 C

Extrusion Temperature:

Temperature needed for extruing your filament. A rule of thumb is 160 to 230 C for PLA, and 215 to 250 C for ABS

Bed Temperature:

Bed temperature needed for getting your filament to stick to your heated bed. A rule of thumb is 60 C for PLA and 110 C for ABS.

Slic3r Settings:

Print Settings:

• Infill:
  • Fill pattern: Concentric (from rectilinear)
  • Only infill where needed [x] (from [])
• Skirt and Brim:
  • Distance from object: 10 mm (from 6)
  • Brim width: 4 mm (from 0)
• Speed:
  • perimeters: 60 mm/s (from 30)
  • small perimeters: 15 mm/s (30)
  • external perimeters: 50% (70)
  • infill: 80 mm/s (60)
  • solid infill: 20 mm/s (60)
  • top solid infill: 15 mm/s (50)

Filament Settings:

• Filament:
  • Color: yellow
  • Diameter: 1.75
  • Extrusion multiplier: .7
  • Extruder Temperature:
    • First: 200 / other: 191
  • Bed Temperature:
    • First: 80 / other: 75

Printer Settings:

• General:
  • Nozzel diameter: 0.4 mm (from 0.5)
• Custom Start G-Code:

;; start code
G21    ; set to mm
G91    ; relative position
G1 Z15 F4800    ; linear move to z 15 with 4800 feed rate
G90    ; set to absolute positioning
G28    ; move to home
M104 S197  ; set temp to 197 (ignored)
M190 S81    ; set bed temperature and wait
M109 S198    ; sets temp to 200 and wait (ignored)
;; start code

• Custom End G-Code:

;; end code
G91    ; relative position
G1 Z50 F4800    ; linear move to z 15 with 4800 feed rate
G90    ; set to absolute positioning
G28 X0 Y0    ; move to home on x and y axis
M84    ; stop idle hold
;; end code

-

• Original Custom 1 Start G-Code:

G21
G91
G1 Z15 F4800
G90
G28

• Custom End 1 G-Code:

G91
G1 Z50 F4800
G90
G28 X0 Y0
M84

• Original Custom 2 Start G-Code:

G28 ; home all axes
G1 Z5 F5000 ; lift nozzle

• Custom End 2 G-Code:

M104 S0 ; turn off temperature
G28 X0  ; home X axis
M84     ; disable motors

Soliprint uses default:

ABS: 215 C and 105 C bed

PLA: 190 C and 50 C bed

I bump my PLA up to 195 C and 70 C bed